HDD GURU FORUMS
http://forum.hddguru.com/

Need Pinouts for BGA095 memory chips.
http://forum.hddguru.com/viewtopic.php?f=10&t=35847		 Page 1 of 1
Author:  Giroot [ September 18th, 2017, 14:23 ]
Post subject:  Need Pinouts for BGA095 memory chips.
Does anyone have the pinouts for a BGA095 chip?

I'm having trouble with one particular pin/contact, and I'm wondering if that pin is necessary or not.

Thanks in advance!
Author:  HaQue [ September 18th, 2017, 18:13 ]
Post subject:  Re: Need Pinouts for BGA095 memory chips.
which one??
can you put up a pic and chip number printed on it, plus pin assignments you are using?
Author:  Giroot [ September 21st, 2017, 18:24 ]
Post subject:  Re: Need Pinouts for BGA095 memory chips.
Don't have pictures now, but it's this kind of memory chip.
http://www.teeltech.com/wp-content/uplo ... rofile.jpg

KLUBG461BD
Author:  HaQue [ September 22nd, 2017, 0:03 ]
Post subject:  Re: Need Pinouts for BGA095 memory chips.
these are UFS chips. Readers are $$$$ and adapters are expensive too.
https://multi-com.eu/,details,id_pr,21723,key,programmer-ufs-emmc-emcp-nuprog-e,smenu,forensic_tools.html

or you could get these guys to do it. (watch their video):

https://multi-com.eu/,details,id_pr,21724,key,reading-data-image-ufs-in-binary-format-chip-off,smenu,forensic_tools.html



UFS links:
https://www.jedec.org/standards-documents/focus/flash/universal-flash-storage-ufs
https://www.teeltech.com/wp-content/uploads/2017/05/Teel-Tech-Dediprog-Brochure.pdf
http://www.keysight.com/upload/cmc_upload/All/7_WE7Slides_PoweringTheNextMobileGeneration.pdf
https://www.arasan.com/products/ufs/ufs-device/
etc...


discussion:
http://forum.acelaboratory.com/viewtopic.php?t=8987&start=15
Author:  Bolo [ September 22nd, 2017, 14:08 ]
Post subject:  Re: Need Pinouts for BGA095 memory chips.
@giroot: all of UFS uses G3 2Lane interface for communication - this is totally different from known normal eMMC transfer which is also commonly used in SD/microSD Cards so Command, Clock synchronisation and Data lines (1,4,8 bit) - it's rather SCSI model if we talk about architecture. So you are looking for pinout for G3 2Lane or NAND pinout for this chip to read this chip over VNR, FE, PC3000 ?

P.S
Look at here - I think this will give you some clue ;) Link: https://multi-com.pl/pimg/IMG_1063.JPG
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/