All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 6 posts ] 
Author Message
 Post subject: Monolith SD Card Sandisk - > 8 Bit Or 16 Bit Pinout Wiring
PostPosted: October 27th, 2017, 5:42 
Offline
User avatar

Joined: August 15th, 2006, 3:01
Posts: 2376
Location: CDRLabs @ Chandigarh [ India ]
Hello To all My Seniors ,
I wanted to ask you that if i have a 16 Bit pinout SD Card From Sandisk And its Wired for 8 Bit Can it still Read Its ID Properly ? . I have one more question but i will ask after i get a reply to this one .I have a Sandisk Extreme 32 GB SD Card That is Iding Like 0x98009082 72570904 and i cannot pass Read ID section in PC3K .TS Guys Says ID is Not Correct ,I have Wired For SDHC Type 4 8 Bit pinout for this Sandisk .I checked all my connections are ok ,Micro Switch 1,2,3,4,5 are off and 6 is on .I2 that is WP is not connected .Also i have used VCC and GND from main pins and i have connected nothing to F1 and J1 VCC and K1 GND as i feel vcc and gnd can travel to that pins from main points of sd card .Shall i try and connect these three points .

_________________
Regards
Amarbir S Dhillon
CDRLabs Data Recovery - [ Chandigarh ,India ]
My Data Recovery Experiments - > https://www.facebook.com/chandigarhdatarecovery


Top
 Profile  
 
 Post subject: Re: Monolith SD Card Sandisk - > 8 Bit Or 16 Bit Pinout Wiri
PostPosted: October 27th, 2017, 7:20 
Offline

Joined: October 24th, 2009, 15:22
Posts: 522
Location: Poland
Try on other reader to verify. It is typical problem with incorrect ID for monolith on PC3K reader. But it can be also some internal problem with chip or soldering.

_________________
Odzyskiwanie danych


Top
 Profile  
 
 Post subject: Re: Monolith SD Card Sandisk - > 8 Bit Or 16 Bit Pinout Wiri
PostPosted: October 27th, 2017, 7:37 
Offline
User avatar

Joined: August 15th, 2006, 3:01
Posts: 2376
Location: CDRLabs @ Chandigarh [ India ]
arvika wrote:
Try on other reader to verify. It is typical problem with incorrect ID for monolith on PC3K reader. But it can be also some internal problem with chip or soldering.


:mrgreen: ,
This is The Problem Arvika Sir I have a single Horse Called PC3K Flash .Good Thing Would Be To Get The Hardware Part of Softcenter At Least As Soon As i Can Afford ,But in anycase Can You suggest How And what i Can Try

_________________
Regards
Amarbir S Dhillon
CDRLabs Data Recovery - [ Chandigarh ,India ]
My Data Recovery Experiments - > https://www.facebook.com/chandigarhdatarecovery


Top
 Profile  
 
 Post subject: Re: Monolith SD Card Sandisk - > 8 Bit Or 16 Bit Pinout Wiri
PostPosted: October 27th, 2017, 17:30 
Offline
User avatar

Joined: December 4th, 2012, 1:35
Posts: 2973
Location: Adelaide, Australia
buy a SC reader :-0


Top
 Profile  
 
 Post subject: Re: Monolith SD Card Sandisk - > 8 Bit Or 16 Bit Pinout Wiri
PostPosted: October 27th, 2017, 18:07 
Offline

Joined: November 29th, 2006, 10:08
Posts: 6938
Location: UK
HaQue wrote:
buy a SC reader :-0



Yeah, it’s cheap and good!

Not fancy, but it works.

Don’t forget to add the appropriate adaptors and the new voltage board!

_________________
PC Image Data Recovery
www.pcimage.co.uk


Top
 Profile  
 
 Post subject: Re: Monolith SD Card Sandisk - > 8 Bit Or 16 Bit Pinout Wiri
PostPosted: October 28th, 2017, 6:51 
Offline
User avatar

Joined: August 15th, 2006, 3:01
Posts: 2376
Location: CDRLabs @ Chandigarh [ India ]
pcimage wrote:
HaQue wrote:
buy a SC reader :-0



Yeah, it’s cheap and good!

Not fancy, but it works.

Don’t forget to add the appropriate adaptors and the new voltage board!


Sean Sir ,
I will skip the power adapter i plan to make one in different design myself

_________________
Regards
Amarbir S Dhillon
CDRLabs Data Recovery - [ Chandigarh ,India ]
My Data Recovery Experiments - > https://www.facebook.com/chandigarhdatarecovery


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 9 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group