All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 24 posts ]  Go to page Previous  1, 2
Author Message
 Post subject: Re: OCZ Vertex SSD (Indilinx Barefoot 3) not recognized in B
PostPosted: December 15th, 2017, 4:26 
Offline

Joined: January 8th, 2008, 5:21
Posts: 848
Location: uk
Is it possible the image is partially decrypted? Meaning full decryption had been selected but interrupted before it was completed.

Maybe you could start with a freshly imaged drive, run the Truecrypt recovery boot disk/tools and select full decryption.


Top
 Profile  
 
 Post subject: Re: OCZ Vertex SSD (Indilinx Barefoot 3) not recognized in B
PostPosted: December 16th, 2017, 14:25 
Offline

Joined: March 12th, 2016, 1:31
Posts: 23
Location: Canada
dick wrote:
Is it possible the image is partially decrypted? Meaning full decryption had been selected but interrupted before it was completed.

Maybe you could start with a freshly imaged drive, run the Truecrypt recovery boot disk/tools and select full decryption.

No, I've tried fully decrypting a new clone from the TrueCrypt rescue disk and the result is the same, the drive isn't bootable and most files are missing. It looks like the dd backup stopped backing up useful data after a certain point. Please see attached for an R-Studio screenshot.

So I'm thinking the dd backup is useless and will need to go back to looking for solutions with the original drive.


Attachments:
R-Studio.png
R-Studio.png [ 32.97 KiB | Viewed 1309 times ]
Top
 Profile  
 
 Post subject: Re: OCZ Vertex SSD (Indilinx Barefoot 3) not recognized in B
PostPosted: December 20th, 2017, 22:33 
Offline

Joined: March 12th, 2016, 1:31
Posts: 23
Location: Canada
I'd like to confirm which PC-3000 products are needed to get the data cloned onto a new drive. Do I need all 3?
    PC-3000 Portable
    PC-3000 SSD
    PC-3000 Data Extractor Portable


Top
 Profile  
 
 Post subject: Re: OCZ Vertex SSD (Indilinx Barefoot 3) not recognized in B
PostPosted: December 21st, 2017, 0:04 
Offline
User avatar

Joined: February 9th, 2009, 16:13
Posts: 2105
Location: Ontario, Canada
Yes, you need all 3 to handle imaging SSDs with firmware issues. As PC3000 licenses are non transferable, it is a huge price to pay for a single drive which might not be recoverable.

_________________
Luke
RAID Data Recovery


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 24 posts ]  Go to page Previous  1, 2

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 6 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group