HDD GURU FORUMS http://forum.hddguru.com/ |
|
MicroSD 2nd Bank http://forum.hddguru.com/viewtopic.php?f=10&t=36494 |
Page 1 of 1 |
Author: | HaQue [ March 1st, 2018, 10:03 ] |
Post subject: | MicroSD 2nd Bank |
as anyone seen this pinout with a 2nd bank? I assume R/B (2A) is connected internally for all banks. I tried each empty pad for usual pinout but no second bank. Device is SanDisk 128GB. With config for 64GB, one bank I can get good layout, but must be 2nd bank somehow. Thanks in advance for any ideas Attachment: MicroSD.jpg [ 11.97 KiB | Viewed 6345 times ] |
Author: | arvika [ March 1st, 2018, 10:56 ] |
Post subject: | Re: MicroSD 2nd Bank |
Yes, i meet cases with second bank. Show photo of device. |
Author: | HaQue [ March 2nd, 2018, 11:14 ] |
Post subject: | Re: MicroSD 2nd Bank |
Thanks Michal, here is photo: Attachment:
|
Author: | arvika [ March 2nd, 2018, 16:02 ] |
Post subject: | Re: MicroSD 2nd Bank |
I recovered some time ago same card. Here is the model: http://www.flash-extractor.com/library/ ... 9b_92__1x2 There is two banks. I don't even make any info in my resources about second bank, because it was easy to find. In fact you have three possibility: A1, G1, D3. |
Author: | HaQue [ March 2nd, 2018, 19:39 ] |
Post subject: | Re: MicroSD 2nd Bank |
Thanks. I tried each. using CE1. with A1 and G1, other banks showed FF FF FF FF, with D3 showed 00 00 00 00 one thing I did not try was CE0 and setting join CE. I should not need to add extra R/B right? Thanks |
Author: | arvika [ March 3rd, 2018, 5:16 ] |
Post subject: | Re: MicroSD 2nd Bank |
As I remember only change CE. |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |