All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 7 posts ] 
Author Message
 Post subject: Toshiba THNSN2256GSPS totally dead
PostPosted: March 7th, 2018, 4:30 
Offline

Joined: April 4th, 2008, 5:49
Posts: 42
Hi Sirs,

I received this SSD. Connected to adapter (PCI card) no signals of life. Completely dead, not recognised at all. I double checked the adapter with another SSD, adapter it's ok.

Electrical issue (if yes where to check) or Controller issue?

Thanks in advance

Max


Attachments:
20180303_172420.jpg
20180303_172420.jpg [ 2.57 MiB | Viewed 15470 times ]
20180303_172411.jpg
20180303_172411.jpg [ 2.65 MiB | Viewed 15470 times ]
Top
 Profile  
 
 Post subject: Re: Toshiba THNSN2256GSPS totally dead
PostPosted: March 7th, 2018, 6:49 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 15440
Location: Australia
I would measure V1 - V4.

Attachment:
regs.jpg
regs.jpg [ 379.65 KiB | Viewed 15455 times ]


ISL8022, Renesas/Intersil, Dual 2A/1.7A Low Quiescent Current 2.25MHz Synchronous Buck Regulator, Vin = 2.8V - 5.5V, marking 8022, DFN-12:
https://www.intersil.com/content/dam/Intersil/documents/isl8/isl8022.pdf

M25P16, 16-Mbit (2M x 8) serial Flash Memory, marking 25P16:
http://investors.st.com/phoenix.zhtml?c=111941&p=irol-newsArticle_print&ID=904041

M25P40VP, STMicroelectronics, 4 Mbit (512 K + 8) Serial Flash, 2.3V - 3.6V, marking P40V:
http://www.farnell.com/datasheets/40267.pdf

AN1995 - APPLICATION NOTE- Serial Flash Memory Device Marking - STMicroelectronics (January 2005):
https://www.gme.cz/data/attachments/dsh.944-048.2.pdf

TN-12-24: Serial Flash Product Marks - Micron Technology, Inc:
https://www.micron.com/~/media/Documents/Products/Technical%20Note/NOR%20Flash/tn1224_spi_marking.pdf

_________________
A backup a day keeps DR away.


Top
 Profile  
 
 Post subject: Re: Toshiba THNSN2256GSPS totally dead
PostPosted: February 14th, 2019, 13:48 
Offline

Joined: February 14th, 2019, 13:33
Posts: 2
Location: Canada
Did you ever find the cause for the SDD failure? I see the recommended test points, but not the specs for voltage. I have an identical drive which seems dead too. It just gets hot. I can't see any physical damage to it.

Thanks for any information

pierre


Top
 Profile  
 
 Post subject: Re: Toshiba THNSN2256GSPS totally dead
PostPosted: February 14th, 2019, 16:21 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 15440
Location: Australia
AFAICT, THNSN2256GSPS is a PCIe SSD. If so, then it won't work with a SATA adapter. Is that your problem?

_________________
A backup a day keeps DR away.


Top
 Profile  
 
 Post subject: Re: Toshiba THNSN2256GSPS totally dead
PostPosted: February 15th, 2019, 6:38 
Offline
User avatar

Joined: December 4th, 2012, 1:35
Posts: 3844
Location: Adelaide, Australia
he said PCI card, not SATA


Top
 Profile  
 
 Post subject: Re: Toshiba THNSN2256GSPS totally dead
PostPosted: March 5th, 2019, 21:55 
Offline

Joined: February 14th, 2019, 13:33
Posts: 2
Location: Canada
fzabkar wrote:
I would measure V1 - V4.

Attachment:
regs.jpg


ISL8022, Renesas/Intersil, Dual 2A/1.7A Low Quiescent Current 2.25MHz Synchronous Buck Regulator, Vin = 2.8V - 5.5V, marking 8022, DFN-12:
https://www.intersil.com/content/dam/Intersil/documents/isl8/isl8022.pdf

M25P16, 16-Mbit (2M x 8) serial Flash Memory, marking 25P16:
http://investors.st.com/phoenix.zhtml?c=111941&p=irol-newsArticle_print&ID=904041

M25P40VP, STMicroelectronics, 4 Mbit (512 K + 8) Serial Flash, 2.3V - 3.6V, marking P40V:
http://www.farnell.com/datasheets/40267.pdf

AN1995 - APPLICATION NOTE- Serial Flash Memory Device Marking - STMicroelectronics (January 2005):
https://www.gme.cz/data/attachments/dsh.944-048.2.pdf

TN-12-24: Serial Flash Product Marks - Micron Technology, Inc:
https://www.micron.com/~/media/Documents/Products/Technical%20Note/NOR%20Flash/tn1224_spi_marking.pdf


I have the exact same problem on the same drive. You say to check V1-V4, what should they be normally?


Top
 Profile  
 
 Post subject: Re: Toshiba THNSN2256GSPS totally dead
PostPosted: March 6th, 2019, 15:53 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 15440
Location: Australia
macgyverman wrote:
I have the exact same problem on the same drive. You say to check V1-V4, what should they be normally?

I don't know their actual values, but I know they shouldn't be 0V.

_________________
A backup a day keeps DR away.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 16 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group