All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 6 posts ] 
Author Message
 Post subject: SxS Memory in RAID0
PostPosted: March 15th, 2018, 7:59 
Offline
User avatar

Joined: May 13th, 2010, 11:17
Posts: 2785
Location: Kuwait
SxS Memory in RAID0 <<---------Really!!

Yes, this is my 1st. RAID0 case 64gb x2 Memories..

The Cam (Sony) supports upto 2 (Internal SxS Memories together as Raid0) and has External slot for Additional Mem. (CF)

Working on it now, (will post later the updates once finished)

Anyone got similar case heheh ? :shock:

_________________
Kuwait Data Recovery - UNIX GTC
The only reason for time is so that everything doesn't happen at once. By: Albert Einstein


Top
 Profile  
 
 Post subject: Re: SxS Memory in RAID0
PostPosted: March 15th, 2018, 10:29 
Offline
User avatar

Joined: January 28th, 2009, 10:54
Posts: 3452
Location: Greece
:shock:
never seen this!

Taking into account how fragile those memories are, I'd say putting them in RAID0 is, well, not the brightest idea ever.... :mrgreen:

_________________
http://www.northwind.gr
SandForce SSD Recovery
Ransomware Reverse Engineering - NoMoreRansom! partners


Top
 Profile  
 
 Post subject: Re: SxS Memory in RAID0
PostPosted: March 17th, 2018, 3:48 
Offline
User avatar

Joined: May 13th, 2010, 11:17
Posts: 2785
Location: Kuwait
northwind wrote:
:shock:
never seen this!

Taking into account how fragile those memories are, I'd say putting them in RAID0 is, well, not the brightest idea ever.... :mrgreen:


Well its by default when you run format with 2 memories fixed inside.
most of the clients don`t know about tech. details till something wrong happens like now on this case

_________________
Kuwait Data Recovery - UNIX GTC
The only reason for time is so that everything doesn't happen at once. By: Albert Einstein


Top
 Profile  
 
 Post subject: Re: SxS Memory in RAID0
PostPosted: March 19th, 2018, 7:47 
Offline
User avatar

Joined: May 13th, 2010, 11:17
Posts: 2785
Location: Kuwait
As an update here, in Winhex it shows the disk is part of RAID0 (64gb x2)
but It is not.

Never trust the client <------ Rule #1 in DR

I got the camera and installed 2 SxS memories inside, and found that There is NO RAID0 option
not even inside the Manual.

When you install 2 memories and start recording it fills Mem-A when almost full will send you an notification then it switches to Mem-B (if both fixed) otherwise will stop @ the end.

Now based on those facts, can someone Guess what really happened here? (I got it figured here)
i really don`t like it sometimes when someone tells you a story.

I`ll put it this way:

Patient visits a Doctor and sits not saying anything, and when the Doctor Asks Whats up? Whats Wrong with you?
Patient says: Well, You are the Doctor here, you should tell me what do i have?

Take a Good guess here heheheh :shock:


Attachments:
Winhex-Boot-Sec.jpg
Winhex-Boot-Sec.jpg [ 450.18 KiB | Viewed 6210 times ]
Winhex-B.jpg
Winhex-B.jpg [ 154.06 KiB | Viewed 6210 times ]
Winhex-A.jpg
Winhex-A.jpg [ 172.85 KiB | Viewed 6210 times ]
IMG_20180319_115130.jpg
IMG_20180319_115130.jpg [ 2.43 MiB | Viewed 6210 times ]
IMG_20180319_113108.jpg
IMG_20180319_113108.jpg [ 2.52 MiB | Viewed 6210 times ]
IMG_20180319_113236.jpg
IMG_20180319_113236.jpg [ 2.79 MiB | Viewed 6210 times ]

_________________
Kuwait Data Recovery - UNIX GTC
The only reason for time is so that everything doesn't happen at once. By: Albert Einstein
Top
 Profile  
 
 Post subject: Re: SxS Memory in RAID0
PostPosted: March 19th, 2018, 9:14 
Offline

Joined: August 18th, 2010, 17:35
Posts: 3636
Location: Massachusetts, USA
JBOD set up?

_________________
Hard Disk Drive, SSD, USB Drive and RAID Data Recovery Specialist in Massachusetts


Top
 Profile  
 
 Post subject: Re: SxS Memory in RAID0
PostPosted: March 19th, 2018, 9:41 
Offline
User avatar

Joined: May 13th, 2010, 11:17
Posts: 2785
Location: Kuwait
labtech wrote:
JBOD set up?


Its not in RAID (but Winhex reports it some how)

to cut it short here....
client or one of his Employees connected Both SxS memories to kind of reader (both together) and Re-Init. it
re-partition it with ex-fat

The 1st. time the client sent me only ONE memory, when i saw it reporting as 120gb i asked ur Cam supports 2 Memories (thought its Raid-0) <--- then i posted here about it
they said YES, then i asked for the 2nd. memory, when i saw both i found its separate and not in Raid

something else, i asked for the Cam to verify it myself, i fixed 2 memories inside to test, there is NO RAID OPTION (as i explained before on prev. post)

_________________
Kuwait Data Recovery - UNIX GTC
The only reason for time is so that everything doesn't happen at once. By: Albert Einstein


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 23 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group