All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 9 posts ] 
Author Message
 Post subject: Broken BGA 132
PostPosted: April 9th, 2018, 6:10 
Offline
User avatar

Joined: May 13th, 2010, 11:17
Posts: 2357
Location: Kuwait
Anyone experienced such a case with this damage guys?
worth the time or not?

Thnx


Attachments:
2018-04-09_00041.jpg
2018-04-09_00041.jpg [ 1.06 MiB | Viewed 2535 times ]
2018-04-09_00040.jpg
2018-04-09_00040.jpg [ 791.74 KiB | Viewed 2535 times ]
2018-04-09_00038.jpg
2018-04-09_00038.jpg [ 1.27 MiB | Viewed 2535 times ]
2018-04-09_00036.jpg
2018-04-09_00036.jpg [ 1.1 MiB | Viewed 2535 times ]

_________________
Kuwait Data Recovery - UNIX GTC
The only reason for time is so that everything doesn't happen at once. By: Albert Einstein
Top
 Profile  
 
 Post subject: Re: Broken BGA 132
PostPosted: April 9th, 2018, 7:13 
Offline
User avatar

Joined: December 4th, 2012, 1:35
Posts: 3160
Location: Adelaide, Australia
Game over for that chip.
Most of the fast SD cards will use pairing of chips extensively I think. I would very much doubt any recovery.
What controller is it, Guessing SM?


Top
 Profile  
 
 Post subject: Re: Broken BGA 132
PostPosted: April 9th, 2018, 7:15 
Offline

Joined: March 19th, 2015, 15:01
Posts: 1405
Location: isreal
einstein9 wrote:
worth the time or not?

Yes, for the garbage


Top
 Profile  
 
 Post subject: Re: Broken BGA 132
PostPosted: April 9th, 2018, 7:20 
Offline

Joined: October 24th, 2009, 15:22
Posts: 579
Location: Poland
If you see damaged crystal inside the crack (check under microsope), there will be no chance for read memory. Since there is Join by Page by small part there will be no chance for success. http://www.flash-extractor.com/library/ ... 0SD/SD_61/

_________________
Odzyskiwanie danych


Top
 Profile  
 
 Post subject: Re: Broken BGA 132
PostPosted: April 9th, 2018, 7:26 
Offline
User avatar

Joined: May 13th, 2010, 11:17
Posts: 2357
Location: Kuwait
@arvika, jermy, HaQue

Thank you guys,,
I was expecting something like this (as a dead end).. but always experts advice is required.

Thank you again...

_________________
Kuwait Data Recovery - UNIX GTC
The only reason for time is so that everything doesn't happen at once. By: Albert Einstein


Top
 Profile  
 
 Post subject: Re: Broken BGA 132
PostPosted: April 9th, 2018, 11:02 
Offline
User avatar

Joined: August 15th, 2006, 3:01
Posts: 2532
Location: CDRLabs @ Chandigarh [ India ]
Hello einstein9 Sir ,
The Break is in the middle which is worse of its kind ,It breaks the crystal under it into two .Sometimes we can get lucky with little break at edge not at this location .I i got a water corroded sandisk which someone refused recovery .I am sure i could reconstruct top layer circuit but i also know that people can go deep into inner layers ,But i am sure they have a good X-ray and lasers to cut surfaces .I am pretty much enjoying learning ,Might be like arvika sir gave you a little tutorial long time back i can also get one from someone after few days once i am more comfortable with tool ,But i do take out time daily to learn this and keep solving cases side by side

_________________
Regards
Amarbir S Dhillon , Chandigarh Data Recovery Labs
Logical,Semi Physical And Physical Data Recovery
Website-> http://www.chandigarhdatarecovery.com


Top
 Profile  
 
 Post subject: Re: Broken BGA 132
PostPosted: April 10th, 2018, 2:48 
Offline
User avatar

Joined: May 13th, 2010, 11:17
Posts: 2357
Location: Kuwait
Thank you

_________________
Kuwait Data Recovery - UNIX GTC
The only reason for time is so that everything doesn't happen at once. By: Albert Einstein


Top
 Profile  
 
 Post subject: Re: Broken BGA 132
PostPosted: April 10th, 2018, 4:17 
Offline

Joined: July 30th, 2012, 3:37
Posts: 236
Location: Fairfield, CT USA
The damaged pads are N/C, don't worry about them.

Put it in a reader, 99% it won't work/overheat.. but there's always that 1%

_________________
Recover My Flash Drive


Top
 Profile  
 
 Post subject: Re: Broken BGA 132
PostPosted: April 10th, 2018, 6:31 
Offline
User avatar

Joined: May 13th, 2010, 11:17
Posts: 2357
Location: Kuwait
jeremyb wrote:
The damaged pads are N/C, don't worry about them.

Put it in a reader, 99% it won't work/overheat.. but there's always that 1%


Believe it or not, FEW Clients here are paying for Flash/Memory cases, most of them don`t pay more than 50-80$ (which is Bad Investment for the Pro. Tools i have here)

But... I do those cases for Fun (mostly or when am free) and was never about the $$$$,,,
only about getting more experience that's all (for my Training courses i provide for the Law Enforcement where the real $$$ are)

Back again to this case, my client will not pay am sure about it But will try it only for my Ref. and Thank you for bringing this to me... its always good to know few things.. might be the 1%

Have a good day... :wink:

_________________
Kuwait Data Recovery - UNIX GTC
The only reason for time is so that everything doesn't happen at once. By: Albert Einstein


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 9 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group