Hello,
is possible to get pads description for following Transcend and Kingston micro SD cards
Best regards
| Attachments: |
|
untitled.png [ 3.42 MiB | Viewed 5983 times ] |
| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| micro SD question http://forum.hddguru.com/viewtopic.php?f=10&t=36696 |
Page 1 of 1 |
| Author: | jerovsek [ April 16th, 2018, 7:59 ] | ||
| Post subject: | micro SD question | ||
Hello, is possible to get pads description for following Transcend and Kingston micro SD cards Best regards
|
|||
| Author: | fzabkar [ April 16th, 2018, 18:53 ] | ||
| Post subject: | Re: micro SD question | ||
Maybe you can find it in the documentation for an appropriate adapter? https://multi-com.eu BTW, I reduced your 3.4MB image to less than 30KB just by cropping and converting to JPEG.
|
|||
| Author: | jerovsek [ April 17th, 2018, 4:08 ] |
| Post subject: | Re: micro SD question |
Thank you Mr. Žabkar I Will keep in mind file size for next time 
|
|
| Author: | HaQue [ April 17th, 2018, 6:51 ] |
| Post subject: | Re: micro SD question |
Also for the Kingston one Can't see the back clear enough to know what pinout it is If it is the same you don't mention it Good way to take picture is to put MicroSD near a white wall or and shine a desk lamp on the wall so you don't get glare. Angle phone or camera various ways until the back PCB is visible If you play around with this method you can determine pcb/pinout without removing coating |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|