HDD GURU FORUMS http://forum.hddguru.com/ |
|
Phison PS3111 SSD can't be identified http://forum.hddguru.com/viewtopic.php?f=10&t=36726 |
Page 1 of 1 |
Author: | omeric4c [ April 23rd, 2018, 8:28 ] |
Post subject: | Phison PS3111 SSD can't be identified |
Phison PS3111 SSD ,can't be identified, how to switch it in SAFE-MODE? Attachment: Attachment:
|
Author: | omeric4c [ April 23rd, 2018, 10:47 ] |
Post subject: | Re: Phison PS3111 SSD can't be identified |
Short which points switch it in SAFE-MODE? |
Author: | arvika [ April 23rd, 2018, 11:08 ] |
Post subject: | Re: Phison PS3111 SSD can't be identified |
What tool do you have? If I good remember PC3K SSD not support this drive yet. FE too. |
Author: | omeric4c [ April 23rd, 2018, 18:49 ] |
Post subject: | Re: Phison PS3111 SSD can't be identified |
http://www.acelaboratory.com/conference_usa2018.php Third part – Data Recovery from SSD/Flash 2:30pm – 3:00pm Data recovery from recent SSDs based on Marvell, Silicon Motion (SM2258) and Phison (PS3111) controllers 3:00pm – 3:30pm Translators functioning principles of today’s controllers through the example of PHISON and SILICON MOTION implementation 3:30pm – 3:45pm XOR structure. The extraction of new XOR pattern from user data 3:45pm – 4:00pm The up-to-date MLCx3 NAND chips and the specifics of working with them 4:00pm End of the conference Attachment: Attachment:
|
Author: | fzabkar [ April 23rd, 2018, 19:22 ] |
Post subject: | Re: Phison PS3111 SSD can't be identified |
Google turns up some possibly useful threads: http://www.google.com/search?q=phison+fbc0 |
Author: | digisupport [ April 24th, 2018, 0:52 ] |
Post subject: | Re: Phison PS3111 SSD can't be identified |
PS3111 is not yet supported by PC3000 SSD but will be in the future. |
Author: | omeric4c [ April 24th, 2018, 7:29 ] |
Post subject: | Re: Phison PS3111 SSD can't be identified |
Great Thanks to fzabkar!! by the way Phison PS3110 SSD ? how to switch it in SAFE-MODE? |
Author: | einstein9 [ April 25th, 2018, 3:18 ] |
Post subject: | Re: Phison PS3111 SSD can't be identified |
omeric4c wrote: Great Thanks to fzabkar!! by the way Phison PS3110 SSD ? how to switch it in SAFE-MODE? the 2 images you sent are not so clear (it might be good to start) but prefer if you upload a better full size images (front/back sides) |
Author: | fzabkar [ May 3rd, 2018, 16:26 ] |
Post subject: | Re: Phison PS3111 SSD can't be identified |
omeric4c wrote: by the way Phison PS3110 SSD ? how to switch it in SAFE-MODE The following PS3110 example has an FBC0 test point adjacent to a +3.3V test point (the PS3111 has FBC0 and Ground): http://thessdreviewcdn2.thessdreview1.netdna-cdn.com/wp-content/uploads/2014/11/Corsair-Neutron-XT-240GB-SSD-PCB-Front.png Perhaps one could try connecting the two test points via a 1K resistor rather than a direct short? I would first measure the voltage at FBC0 in normal mode. |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |