Switch to full style
CompactFlash, SD, MMC, USB flash storage. Anything that does not have moving parts inside.
Post a reply

LITEONIT LCS-256M6S

May 25th, 2018, 9:05

Model : LITEONIT LCS-256M6S 2.5 7mm 256GB
Firmware : DC8110C

This drive only lets me read one sector after each power cycle. After that sector it goes BSY.
It has a Marvell 88SS9187-BLD2 controller.

Any one with some experience of this device who knows what to do?
Thanks!

Re: LITEONIT LCS-256M6S

May 25th, 2018, 17:22

What error is in register after attempting read?

Re: LITEONIT LCS-256M6S

May 29th, 2018, 2:57

Sorry for the late reply.
Register sais nothing at al. Just the BSY thats on.

Re: LITEONIT LCS-256M6S

May 29th, 2018, 3:24

Update:
I left it plugged in during the night in standby.
When I started DataExtractor in ACE, I could read about 80MB flawless, then it started to only let me read one sector again.

Re: LITEONIT LCS-256M6S

May 29th, 2018, 6:30

Can I take a look remotely?

Re: LITEONIT LCS-256M6S

May 29th, 2018, 11:33

lcoughey wrote:Can I take a look remotely?


Absolutely if you would like.
I'll write you a PM, thanks!

Re: LITEONIT LCS-256M6S

June 1st, 2018, 10:00

Hi M8,

Im having the same problem with the same model, but it have only 120GB.
Do you solve the problem ?

Thanks
Post a reply