| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| LITEONIT LCS-256M6S http://forum.hddguru.com/viewtopic.php?f=10&t=36869 |
Page 1 of 1 |
| Author: | Adisa [ May 25th, 2018, 9:05 ] |
| Post subject: | LITEONIT LCS-256M6S |
Model : LITEONIT LCS-256M6S 2.5 7mm 256GB Firmware : DC8110C This drive only lets me read one sector after each power cycle. After that sector it goes BSY. It has a Marvell 88SS9187-BLD2 controller. Any one with some experience of this device who knows what to do? Thanks! |
|
| Author: | scratchy [ May 25th, 2018, 17:22 ] |
| Post subject: | Re: LITEONIT LCS-256M6S |
What error is in register after attempting read? |
|
| Author: | Adisa [ May 29th, 2018, 2:57 ] |
| Post subject: | Re: LITEONIT LCS-256M6S |
Sorry for the late reply. Register sais nothing at al. Just the BSY thats on. |
|
| Author: | Adisa [ May 29th, 2018, 3:24 ] |
| Post subject: | Re: LITEONIT LCS-256M6S |
Update: I left it plugged in during the night in standby. When I started DataExtractor in ACE, I could read about 80MB flawless, then it started to only let me read one sector again. |
|
| Author: | lcoughey [ May 29th, 2018, 6:30 ] |
| Post subject: | Re: LITEONIT LCS-256M6S |
Can I take a look remotely? |
|
| Author: | Adisa [ May 29th, 2018, 11:33 ] |
| Post subject: | Re: LITEONIT LCS-256M6S |
lcoughey wrote: Can I take a look remotely? Absolutely if you would like. I'll write you a PM, thanks! |
|
| Author: | IDionisio [ June 1st, 2018, 10:00 ] |
| Post subject: | Re: LITEONIT LCS-256M6S |
Hi M8, Im having the same problem with the same model, but it have only 120GB. Do you solve the problem ? Thanks |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|