HDD GURU FORUMS http://forum.hddguru.com/ |
|
More Monolithic Flash Drive Videos... http://forum.hddguru.com/viewtopic.php?f=10&t=36897 |
Page 1 of 1 |
Author: | jeremyb [ June 3rd, 2018, 18:18 ] |
Post subject: | More Monolithic Flash Drive Videos... |
Slow week so I made a video & article. Since almost every monolithic flash drive video focuses on the same old technology. eg: 1. Soldering to HUGE contact pads in unimaginative ways. 2. Globbing large amounts of solder onto a PCB, fluxing it and praying it doesn't short. 3. Using laughable contraptions. I figure let's see something different from my shop Monolithic Flash Drive Recovery - A Basic How To |
Author: | fzabkar [ June 3rd, 2018, 18:32 ] |
Post subject: | Re: More Monolithic Flash Drive Videos... |
Thanks! Just one suggestion. Resettable fuses (polyswitches) can be scavenged from the USB ports of dead motherboards. They will typically have a 1A rating (USB 2.0). |
Author: | jeremyb [ June 3rd, 2018, 18:53 ] |
Post subject: | Re: More Monolithic Flash Drive Videos... |
fzabkar wrote: Thanks! Just one suggestion. Resettable fuses (polyswitches) can be scavenged from the USB ports of dead motherboards. They will typically have a 1A rating (USB 2.0). Thx, I didn't know that I pull them off SanDisk USB 2.0 Flash Drives... |
Author: | jeremyb [ June 4th, 2018, 15:48 ] |
Post subject: | Re: More Monolithic Flash Drive Videos... |
Nobody things its freaking awesome that I stripped the solder mask, then created a new solder mask that exposes the vias that need soldering and protects everything else??? All within 0.01mm accuracy.. Guess I'm way behind on the times :-\ |
Author: | ddrecovery [ June 4th, 2018, 16:26 ] |
Post subject: | Re: More Monolithic Flash Drive Videos... |
jeremyb wrote: Nobody things its freaking awesome that I stripped the solder mask, then created a new solder mask that exposes the vias that need soldering and protects everything else??? All within 0.01mm accuracy.. Guess I'm way behind on the times :-\ FWIW. Every time I have asked you if you do Monolith recoveries (if I didn't have the pinout) you always said no. So I didn't watch the video when I saw the post. Also the most 'exciting' bit of applying the mask you actually left out and just describe it in text. Again I missed this first time round. Anyway, congratulations JB. |
Author: | jeremyb [ June 4th, 2018, 16:43 ] |
Post subject: | Re: More Monolithic Flash Drive Videos... |
ddrecovery wrote: jeremyb wrote: Nobody things its freaking awesome that I stripped the solder mask, then created a new solder mask that exposes the vias that need soldering and protects everything else??? All within 0.01mm accuracy.. Guess I'm way behind on the times :-\ FWIW. Every time I have asked you if you do Monolith recoveries (if I didn't have the pinout) you always said no. So I didn't watch the video when I saw the post. Also the most 'exciting' bit of applying the mask you actually left out and just describe it in text. Again I missed this first time round. Anyway, congratulations JB. Maybe those were the early days, we haven't talked much recently, I've gotten much better in the past year. Yeah, I left out applying the mask because it's boring unless you want to see me fiddling around for 5min trying to align it up seeing the mask as a final product is the cool part. It's in the video though.. |
Author: | jeremyb [ June 4th, 2018, 21:52 ] |
Post subject: | Re: More Monolithic Flash Drive Videos... |
ddrecovery wrote: jeremyb wrote: Also the most 'exciting' bit of applying the mask you actually left out and just describe it in text. https://vimeo.com/273428897 Notes: 1. I screwed up the measurements on the bottom hole so it's not dead correct 2. Using a "little" hot air relaxes the glue so you can position it exactly where you want. |
Author: | labtech [ June 4th, 2018, 23:23 ] |
Post subject: | Re: More Monolithic Flash Drive Videos... |
jeremyb wrote: Nobody things its freaking awesome that I stripped the solder mask, then created a new solder mask that exposes the vias that need soldering and protects everything else??? All within 0.01mm accuracy.. Nice method |
Author: | northwind [ June 5th, 2018, 3:27 ] |
Post subject: | Re: More Monolithic Flash Drive Videos... |
Nice, congrats! |
Author: | rogfanther [ June 5th, 2018, 19:05 ] |
Post subject: | Re: More Monolithic Flash Drive Videos... |
jeremyb wrote: 3. Using laughable contraptions. It would be interesting to see some ... One idea for easier applying the tape could be using a roller like those used to apply ink to rubber stamps ( sorry, do not know what they are called and even if I´m calling it the right name. |
Author: | Amarbir[CDR-Labs] [ June 24th, 2018, 14:10 ] |
Post subject: | Re: More Monolithic Flash Drive Videos... |
Hello, Jermyb very nice post ,How do you drill the holes in this using s pcb drilling machine or cnc |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |