All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 4 posts ] 
Author Message
 Post subject: SSD Component Search
PostPosted: June 18th, 2018, 19:24 
Offline
User avatar

Joined: June 11th, 2013, 17:01
Posts: 1710
Location: Phoenix, AZ USA
I have a Samsung SSD MZ-KPU1T0T/0A6. It was water damaged in one corner. I can see one component has a crack through the top of the chip and had corrosion around the legs, so presumably the crack was caused by a short. I am having difficulty tracking down what this component might be. Marking are:-

PSR1
43K
C8ST

I am guessing buying one may not be an option, so perhaps using a donor may be the way to go, but wanted to see if anyone (@fzabkar?) might be able to shed light on what component we are looking at.


Attachments:
1.jpg
1.jpg [ 2.15 MiB | Viewed 4369 times ]

_________________
HDD, SSD, Flash and RAID Data Recovery
Founder of The Data Recovery Professionals Group
Top
 Profile  
 
 Post subject: Re: SSD Component Search
PostPosted: June 19th, 2018, 1:57 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 15463
Location: Australia
TPS61086, Texas Instruments, 18.5V PFM - PWM Step-Up DC-DC Converter with 2A Switch, 2.3V - 6.0Vin, VSON-10, marking PSRI:
http://www.ti.com/lit/ds/symlink/tps61086.pdf

I would measure the resistance of the capacitor to the left of the diode ("5").

_________________
A backup a day keeps DR away.


Top
 Profile  
 
 Post subject: Re: SSD Component Search
PostPosted: June 19th, 2018, 3:13 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 15463
Location: Australia
If the NANDs require a +12V supply, then maybe you could patch it into the circuit from an external source?

_________________
A backup a day keeps DR away.


Top
 Profile  
 
 Post subject: Re: SSD Component Search
PostPosted: June 19th, 2018, 13:00 
Offline
User avatar

Joined: June 11th, 2013, 17:01
Posts: 1710
Location: Phoenix, AZ USA
Thanks for the link. I have now searched an found the component and have it on order. Probably safer than patching 12v into the NAND. We can approach this again if this part doesn't solve the issue. Diode mode reading on the cap by the way was 540.

Thanks again.

_________________
HDD, SSD, Flash and RAID Data Recovery
Founder of The Data Recovery Professionals Group


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 27 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group