PCIe SSD to SATA Question

[fzabkar]

This might is what you look for:

Then what?

http://www.ssdformfactor.org/docs/SSD_Form_Factor_Version1_00.pdf

No, but the OP was also looking for something that were outside the box for better cooling opportunities.
But you can continue with hacksaw and cutting :wink:

Your "solution" is useless on its own. At the very least, it requires additional hardware.

Moreover, if the heat affected component is on the underside of the PCB, then you will derive little, if any, benefit from the adapter unless you cut away the obstruction. In any case, you need to first investigate the cause of the heating, which necessitates access to the PCB with a multimeter.

Do you understand now?

[mr_spokk]

Yes, but sometimes you need to buy new hardware.
There is around 8mm of space underneath...+ maybe 2-3mm more if it's not tightened...so there is some space for cooling without cutting.
And of course if you find the shorting problem that cause the heat, then it's of course better to swap that component.
Yes I understand, you have a issue....so I'm out.

[ddrecovery]

Thanks you everyone for all the feedback. All very informative. I will do some testing/experimenting and get back to you all.

[fzabkar]

JMicron JMS583 USB 3.1 Gen 2 to PCIe Gen3x2 Bridge Controller:
http://www.jmicron.com/PDF/brief/jms583.pdf

The JMS583 is a USB 3.1 Gen 2 to PCIe Gen3 x 2 bridge controller between USB host and PCIe storage device.

Aluminum NVMe PCIE USB3.1 HDD Enclosure M.2 to USB SSD Hard Disk Drive Case Type C 3.1 M KEY Connector HDD Box for Desktop PC (US$40):
https://www.aliexpress.com/item/Aluminum-NVMe-PCIE-USB3-1-HDD-Enclosure-M-2-to-USB-SSD-Hard-Disk-Drive-Case/32884307172.html

[scratchy]

Nice find Frank

[ddrecovery]

Nice find Frank

+1

[LarrySabo]

Here's the English language page for apparently similar items at a wide range of prices.

[pcimage]

I have this one...

https://www.megamac.com/collections/env ... o-ngff-ssd