All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 2 posts ] 
Author Message
 Post subject: Detecting the second R/B,CE in monoliths
PostPosted: December 6th, 2018, 9:31 
Offline

Banned User

Joined: August 2nd, 2018, 9:21
Posts: 8
Location: sdasdad
Hi, Can you explain how to detect the second R/B and CE pins in monoliths?

Thanks.


Top
 Profile  
 
 Post subject: Re: Detecting the second R/B,CE in monoliths
PostPosted: December 16th, 2018, 17:21 
Offline

Joined: July 30th, 2012, 3:37
Posts: 310
Location: Fairfield, CT USA
RB isn't needed. The reader can either wait a long period of time or issue a 0x70 status command. RB can be tricky to find due to noise BUT look for RB to go LOW/HIGH after a 30h command and once data starts being read it goes high, match it up to whatever CE is LOW. If there are multiple buses this can be tricky, look for a sharp trigger (ie: no delay) on read or trial and error.

Attachment:
Read_30h.PNG
Read_30h.PNG [ 35.57 KiB | Viewed 3639 times ]


CE: During the boot sequence, CE's will usually look like a cascade..
Attachment:
ID_90h.PNG
ID_90h.PNG [ 24.15 KiB | Viewed 3639 times ]


eg:

Code:
CE0 -> ID (90h)
                CE1 -> ID (90h)
                               CE2 -> ID (90h)
                                              CE3 -> ID (90h)

_________________
Recover My Flash Drive


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 18 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group