All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 8 posts ] 
Author Message
 Post subject: HP V232W 16GB DEAD
PostPosted: August 1st, 2019, 10:45 
Offline

Joined: January 18th, 2010, 23:53
Posts: 165
Location: india
HP V232W 16GB DEAD

please help to check voltage

Attachment:
HP-V232W-01.jpg
HP-V232W-01.jpg [ 1.01 MiB | Viewed 1131 times ]


Top
 Profile  
 
 Post subject: Re: HP V232W 16GB DEAD
PostPosted: August 1st, 2019, 10:54 
Offline
User avatar

Joined: April 3rd, 2011, 0:19
Posts: 1926
Location: Providence, RI
It could just be the picture, but it looks a bit dirty to me. Specifically between the pins of the square controller chip.

Have you tried giving it a bath in isopropyl alcohol, using a brush to clean all the contacts, and then fully drying it?

You might find that will solve the issue.

_________________
Data Medics - Hard Drive, SSD, and RAID Data Recovery Service Company


Top
 Profile  
 
 Post subject: Re: HP V232W 16GB DEAD
PostPosted: August 1st, 2019, 11:23 
Offline
User avatar

Joined: October 21st, 2014, 1:39
Posts: 118
Location: Ellijay, GA
You can start by checking R5 (2.2Ω Resistor). It's common for that resistor to blow if there is a power issue.

_________________
Blizzard Data Recovery


Top
 Profile  
 
 Post subject: Re: HP V232W 16GB DEAD
PostPosted: August 1st, 2019, 13:01 
Offline

Joined: November 29th, 2006, 10:08
Posts: 7464
Location: UK
Blizzard wrote:
You can start by checking R5 (2.2Ω Resistor). It's common for that resistor to blow if there is a power issue.


Yep, it looks a little scorched too.

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!


Top
 Profile  
 
 Post subject: Re: HP V232W 16GB DEAD
PostPosted: August 1st, 2019, 13:10 
Offline
User avatar

Joined: June 11th, 2013, 17:01
Posts: 1276
Location: Phoenix, AZ USA
pcimage wrote:
Blizzard wrote:
You can start by checking R5 (2.2Ω Resistor). It's common for that resistor to blow if there is a power issue.


Yep, it looks a little scorched too.

Indeed, I bet the crud around the controller pins is flux.

_________________
HDD, SSD, Flash and RAID Data Recovery


Top
 Profile  
 
 Post subject: Re: HP V232W 16GB DEAD
PostPosted: August 1st, 2019, 14:58 
Offline
User avatar

Joined: October 21st, 2014, 1:39
Posts: 118
Location: Ellijay, GA
pcimage wrote:
Blizzard wrote:
You can start by checking R5 (2.2Ω Resistor). It's common for that resistor to blow if there is a power issue.

Yep, it looks a little scorched too.
Oh, I didn't zoom in before, but you are right. Now I see it looks like the perennial toast mark in the R where it burned up.

_________________
Blizzard Data Recovery


Top
 Profile  
 
 Post subject: Re: HP V232W 16GB DEAD
PostPosted: August 6th, 2019, 15:33 
Offline
User avatar

Joined: August 15th, 2006, 3:01
Posts: 2690
Location: CDRLabs @ Chandigarh [ India ]
gps31 wrote:
HP V232W 16GB DEAD

please help to check voltage

Attachment:
HP-V232W-01.jpg


Hi GPS ,
I would be eager to work on this NAND whatever the price you need data for ,I am always there for help

_________________
Regards
Amarbir S Dhillon , Chandigarh Data Recovery Labs
Logical,Semi Physical And Physical Data Recovery
Website-> http://www.chandigarhdatarecovery.com


Top
 Profile  
 
 Post subject: Re: HP V232W 16GB DEAD
PostPosted: August 6th, 2019, 21:30 
Offline
User avatar

Joined: December 4th, 2012, 1:35
Posts: 3381
Location: Adelaide, Australia
what is the controller number? I can make out last digits "98M-QN" but not the first letters and numbers. Also what NAND chip is it. Photo of other side?

@Amarbir.. nice formatting! ;-)


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 8 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 5 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group