| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| OCZ Vertex 460A (480GB) Repair http://forum.hddguru.com/viewtopic.php?f=10&t=38360 |
Page 1 of 1 |
| Author: | chrxzzyy [ April 30th, 2019, 14:26 ] |
| Post subject: | OCZ Vertex 460A (480GB) Repair |
Hi guys, I recently bought myself a non functional Vertex 460A in order to repair it as I had positive experiences repairing Vertex 2 drives using SF's MPTool. Now, as it arrived, I connected it to my PC and jumped the header to get it into some kind of repair mode. It's recognized as an non-initializable 128GB which goes by the description "ATA BAREFOOT3-FACTOR SCSI Disk Device". I've tried looking for some kind of firmware flash tool but only found an outdated Indilinx MPTool which doesn't support the IDX500M10-BC controller and doesn't support the TH58TEG8DDKBA8C chips. What can I do to restore the original firmware or upgrade it? Or maybe, if it isn't the firmware, what can I do at all (besides of throwing it away)? |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|