View topic - 128GB Toshiba Marvel ( Apple NVME ) no ID

Main » Forums home » Flash storage, SSD

All times are UTC - 5 hours [ DST ]

128GB Toshiba Marvel ( Apple NVME ) no ID

Page 1 of 1

[ 2 posts ]

Print view

Previous topic | Next topic

Author

Message

nicoalbrecht

Post subject: 128GB Toshiba Marvel ( Apple NVME ) no ID

Posted: September 13th, 2019, 3:40

Joined: June 19th, 2018, 4:52
Posts: 45
Location: United Kingdom

Any advice what to try on a 128GB Toshiba Marvel from a macbook.

SSD doesn't id in

1. DDI NVME
2. PC3000 via usb enclosure

controller seems to warm up to about 50 degress but shows 0 lba via usb enclosure and doesn't show up at all in DDI. Controller doesn't get warm in DDI NVME add on.

Any input welcome.

Top

fzabkar

Post subject: Re: 128GB Toshiba Marvel ( Apple NVME ) no ID

Posted: September 13th, 2019, 4:30

Joined: September 8th, 2009, 18:21
Posts: 15531
Location: Australia

Check the supply voltage at the edge connector. Also check the DEVSLP pin. That's the power on/off control pin.

If you post a hi-res photo of your PCB, I could identify the voltage test points.

_________________
A backup a day keeps DR away.

Top

Page 1 of 1

[ 2 posts ]

Main » Forums home » Flash storage, SSD

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: csava and 42 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum