Main » Forums home » Flash storage, SSD

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 10 posts ] 
  Print view Previous topic | Next topic 
Author Message
HddDonorMarket
 Post subject: Hi Level SSD nothing in hex . Chipoff? ?
PostPosted: January 15th, 2020, 13:22 
Offline
User avatar

Joined: June 16th, 2018, 12:09
Posts: 488
Location: Turkey
Hi level 120Gb SSD .
Windows recognise it. But there are full 00 in hex
It's laptop drive had windows installed customer said.
Where should I start?
Is it necessary chip off ? I don't have reader
Attachment:
20200114_200245.jpg
20200114_200245.jpg [ 2.13 MiB | Viewed 9607 times ]

Attachment:
20200114_200418.jpg
20200114_200418.jpg [ 1.83 MiB | Viewed 9607 times ]

Attachment:
20200114_200543.jpg
20200114_200543.jpg [ 1.49 MiB | Viewed 9607 times ]

_________________
A Recovery Service In Turkey . Veri Kurtarma Türkiye https://www.digitalverikurtarma.com
Donor Drives hdddonormarket.com
Top
 Profile  
 
ddrecovery
 Post subject: Re: Hi Level SSD nothing in hex . Chipoff? ?
PostPosted: January 15th, 2020, 13:36 
Offline
User avatar

Joined: June 11th, 2013, 17:01
Posts: 1710
Location: Phoenix, AZ USA
Do you have PC3K Flash or MRT SSD?

_________________
HDD, SSD, Flash and RAID Data Recovery
Founder of The Data Recovery Professionals Group
Top
 Profile  
 
HddDonorMarket
 Post subject: Re: Hi Level SSD nothing in hex . Chipoff? ?
PostPosted: January 15th, 2020, 14:05 
Offline
User avatar

Joined: June 16th, 2018, 12:09
Posts: 488
Location: Turkey
ddrecovery wrote:
Do you have PC3K Flash or MRT SSD?

I have MRT . Previous version. Has SSD demo. I have tried with it . But there is no hi level brand

_________________
A Recovery Service In Turkey . Veri Kurtarma Türkiye https://www.digitalverikurtarma.com
Donor Drives hdddonormarket.com
Top
 Profile  
 
ddrecovery
 Post subject: Re: Hi Level SSD nothing in hex . Chipoff? ?
PostPosted: January 15th, 2020, 14:20 
Offline
User avatar

Joined: June 11th, 2013, 17:01
Posts: 1710
Location: Phoenix, AZ USA
No surprise there was no Hi Level brand. Looking at the controller I was hoping it may be SM rebranded as it looks like AS2258. I was hoping you might be able to get FW access by using that utility.

_________________
HDD, SSD, Flash and RAID Data Recovery
Founder of The Data Recovery Professionals Group
Top
 Profile  
 
arvika
 Post subject: Re: Hi Level SSD nothing in hex . Chipoff? ?
PostPosted: January 15th, 2020, 15:23 
Offline

Joined: October 24th, 2009, 15:22
Posts: 875
Location: Poland
AS2258-BN it is refurbished Phison S11. You can solve it in PC3K SSD.

_________________
Flash Killer - everyday new resources (pinout, XOR, ECC,config) for flash devices
Top
 Profile  
 
HddDonorMarket
 Post subject: Re: Hi Level SSD nothing in hex . Chipoff? ?
PostPosted: January 17th, 2020, 17:07 
Offline
User avatar

Joined: June 16th, 2018, 12:09
Posts: 488
Location: Turkey
I guess some component failure on PCB . Anyone could assist which point voltages should I measure. Or which components resistance

_________________
A Recovery Service In Turkey . Veri Kurtarma Türkiye https://www.digitalverikurtarma.com
Donor Drives hdddonormarket.com
Top
 Profile  
 
HddDonorMarket
 Post subject: Re: Hi Level SSD nothing in hex . Chipoff? ?
PostPosted: January 17th, 2020, 17:10 
Offline
User avatar

Joined: June 16th, 2018, 12:09
Posts: 488
Location: Turkey
ddrecovery wrote:
No surprise there was no Hi Level brand. Looking at the controller I was hoping it may be SM rebranded as it looks like AS2258. I was hoping you might be able to get FW access by using that utility.

Thanks. I have googled. I am focusing AS2258 BN and Phison S11

_________________
A Recovery Service In Turkey . Veri Kurtarma Türkiye https://www.digitalverikurtarma.com
Donor Drives hdddonormarket.com
Top
 Profile  
 
fzabkar
 Post subject: Re: Hi Level SSD nothing in hex . Chipoff? ?
PostPosted: January 17th, 2020, 17:22 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 15532
Location: Australia
MT3102, M3Tek, 1.5A Continuous 2A Peak 5V Input 2.5MHz Synchronous Step-Down Converter, marking 3102, DFN_6L:
https://www.m3tekic.com/upload/2016/08/20160826154353.pdf

Quicker-and-dirtier switchmode regulator:
http://www.hddoracle.com/viewtopic.php?f=59&t=231&p=8909#p16236


Attachments:
V3.jpg
V3.jpg [ 64.36 KiB | Viewed 9468 times ]
V2.jpg
V2.jpg [ 70.01 KiB | Viewed 9468 times ]
V1.jpg
V1.jpg [ 88.25 KiB | Viewed 9468 times ]

_________________
A backup a day keeps DR away.
Top
 Profile  
 
HddDonorMarket
 Post subject: Re: Hi Level SSD nothing in hex . Chipoff? ?
PostPosted: February 10th, 2020, 17:05 
Offline
User avatar

Joined: June 16th, 2018, 12:09
Posts: 488
Location: Turkey
V1 =1.00 V
V2 =1.78 V
V3 =3.00 V
Attachment:
20200114_200418_.jpg
20200114_200418_.jpg [ 379.53 KiB | Viewed 8739 times ]

_________________
A Recovery Service In Turkey . Veri Kurtarma Türkiye https://www.digitalverikurtarma.com
Donor Drives hdddonormarket.com
Top
 Profile  
 
arvika
 Post subject: Re: Hi Level SSD nothing in hex . Chipoff? ?
PostPosted: February 10th, 2020, 17:28 
Offline

Joined: October 24th, 2009, 15:22
Posts: 875
Location: Poland
I think you wasting your time. Use PC3K and propietary utility for it.

_________________
Flash Killer - everyday new resources (pinout, XOR, ECC,config) for flash devices
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 10 posts ] 

Main » Forums home » Flash storage, SSD

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 87 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group