HDD GURU FORUMS http://forum.hddguru.com/ |
|
Sandisk 128GB shown as Sandisk Anisha 1.00 - 64 MB http://forum.hddguru.com/viewtopic.php?f=10&t=42050 |
Page 1 of 1 |
Author: | Spotmen [ January 8th, 2022, 12:06 ] | ||
Post subject: | Sandisk 128GB shown as Sandisk Anisha 1.00 - 64 MB | ||
Hi, I got this Sandisk 128GB USB Monlith. when connecting to W10, it ask to format. R-Studio show 64 MB. Firmware corruption ? Looks like a common bug. https://forums.sandisk.com/t/sandisk-ul ... tted/33473 Thanks Spot
|
Author: | grig85 [ February 12th, 2023, 19:13 ] | ||
Post subject: | Re: Sandisk 128GB shown as Sandisk Anisha 1.00 - 64 MB | ||
if your Sandisk is recognized as Anisha 64mb - the NAND is disconnected from controller AKA safe mode, ROM mode solution is here
|
Author: | arvika [ February 13th, 2023, 10:16 ] |
Post subject: | Re: Sandisk 128GB shown as Sandisk Anisha 1.00 - 64 MB |
Swap is always risky. If possible (no encryption), always try chip-off method first. |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |