HDD GURU FORUMS http://forum.hddguru.com/ |
|
SMSR150S3/128G PS3108 http://forum.hddguru.com/viewtopic.php?f=10&t=42059 |
Page 1 of 1 |
Author: | WebClaw [ January 11th, 2022, 16:09 ] |
Post subject: | SMSR150S3/128G PS3108 |
Hello all - Wondering if anyone can lend some advice. We've received a SMSR150S3/128G (bare drive). A bit of research on this forum as some others shows it's a RAID 0 device 64GB x2 configuration w/128sector stripe. Drive presents w/normal V and Amp draw. Thermal camera shows nothing crazy weird. However SATA Channel 0 is in BSY state. Thanks to the contributions of others I was able to build an adapter and confirm the second SATA channel is also in a BSY state. Taking into account that with a loader I read back corrupted data and then assembling into a R0 I cannot seen to find the pins to trigger safe mode on this device. Anyone have any idea's? |
Author: | fzabkar [ January 11th, 2022, 16:59 ] |
Post subject: | Re: SMSR150S3/128G PS3108 |
IC UU6 near one of the E3 coils appears to be chipped. What voltages do you measure at all three coils? |
Author: | WebClaw [ January 11th, 2022, 17:35 ] |
Post subject: | Re: SMSR150S3/128G PS3108 |
I will take measurements and get back to you. Here is a better pic of the coils: |
Author: | WebClaw [ January 11th, 2022, 17:39 ] |
Post subject: | Re: SMSR150S3/128G PS3108 |
Chip is okay - just some sticker residue. Good catch. |
Author: | Agrail [ January 12th, 2022, 5:31 ] | ||
Post subject: | Re: SMSR150S3/128G PS3108 | ||
Safe mode
|
Author: | WebClaw [ January 12th, 2022, 14:36 ] |
Post subject: | Re: SMSR150S3/128G PS3108 |
Thanks all - Virtual translator on second channel created and we're pulling off data at 3MB/sec. |
Author: | WebClaw [ January 16th, 2022, 18:55 ] |
Post subject: | Re: SMSR150S3/128G PS3108 |
Just an update 100% recovery - albeit very slow readout. |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |