HDD GURU FORUMS http://forum.hddguru.com/ |
|
Pinout for Samsung EVO 32GB monolith http://forum.hddguru.com/viewtopic.php?f=10&t=42435 |
Page 1 of 1 |
Author: | melvin [ May 24th, 2022, 9:22 ] |
Post subject: | Re: Pinout for Samsung EVO 32GB monolith |
EVO are unrecoverable via NAND protocol for now. Pinout is the same. |
Author: | Amarbir[CDR-Labs] [ May 24th, 2022, 12:54 ] |
Post subject: | Re: Pinout for Samsung EVO 32GB monolith |
melvin wrote: EVO are unrecoverable via NAND protocol for now. Pinout is the same. Hello Melvin , Why is this so ? LDPC |
Author: | melvin [ May 24th, 2022, 12:59 ] |
Post subject: | Re: Pinout for Samsung EVO 32GB monolith |
I think adaptive XOR. |
Author: | Amarbir[CDR-Labs] [ May 24th, 2022, 13:01 ] |
Post subject: | Re: Pinout for Samsung EVO 32GB monolith |
melvin wrote: I think adaptive XOR. Well, At My Place Most Cases Are LDPC or Non Supported XOR Like in Those Sandisk 16x2 Pattern Sandisk Extreme Cards |
Author: | arvika [ May 27th, 2022, 14:56 ] |
Post subject: | Re: Pinout for Samsung EVO 32GB monolith |
MicroSD v93 from our database. We make some research for Samsung Evo cards from this family. XOR should be no problem, mix is not the problem, assembly algorithm is not the problem. Problem is with ECC, non standard. Without ECC all data will be broken. Pinout is other. There is few different pinouts for Samsung MicroSD 2x15. |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |