All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 8 posts ] 
Author Message
 Post subject: HELP NEEDED SSD S3+ 1TB
PostPosted: February 12th, 2024, 16:22 
Offline

Joined: October 30th, 2023, 15:55
Posts: 3
Location: italy
Hi everyone, this is the first post I've written, so I apologize in advance if I'm not clear. I use MRT and I'm trying to have access to this SSD. It mounts an SM2258H chip, when I try to recognize it I get no results. Who could tell me how to go to SAFE MODE? I tried some pins, but I'm afraid of doing damage and ruining the SSD. I attach the photo of the card.

Thanks in advance.

PS: I saw on the PC3000 tutorial that even if it is not listed this type of SSD can be read by choosing one of the star family.


Attachments:
Immagine WhatsApp 2024-02-10 ore 11.33.10_d3cc5c1a.jpg
Immagine WhatsApp 2024-02-10 ore 11.33.10_d3cc5c1a.jpg [ 307.56 KiB | Viewed 1122 times ]
Top
 Profile  
 
 Post subject: Re: HELP NEEDED SSD S3+ 1TB
PostPosted: February 12th, 2024, 17:06 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 15538
Location: Australia
I think ROM mode is selected by P13 in the top group of 8.

Silicon Motion SSD Reference Circuits:

https://www.hddoracle.com/viewtopic.php?p=22726#p22726
https://www.hddoracle.com/download/file.php?id=9649

_________________
A backup a day keeps DR away.


Top
 Profile  
 
 Post subject: Re: HELP NEEDED SSD S3+ 1TB
PostPosted: February 12th, 2024, 19:02 
Offline
User avatar

Joined: July 12th, 2010, 4:38
Posts: 1420
Location: Portugal
Recovering one right now, with a SM2258XT, but 512GB.

The safe mode pins are the ones marked.


Attachments:
Immagine WhatsApp 2024-02-10 ore 11.33.10_d3cc5c1a.jpg
Immagine WhatsApp 2024-02-10 ore 11.33.10_d3cc5c1a.jpg [ 487.9 KiB | Viewed 1077 times ]

_________________
http://www.pclab.com.pt facebook.com/PCLAB.A.T
ACELab partner
Top
 Profile  
 
 Post subject: Re: HELP NEEDED SSD S3+ 1TB
PostPosted: February 13th, 2024, 5:16 
Offline

Joined: October 30th, 2023, 15:55
Posts: 3
Location: italy
which loader you've selected?


Top
 Profile  
 
 Post subject: Re: HELP NEEDED SSD S3+ 1TB
PostPosted: February 13th, 2024, 6:10 
Offline
User avatar

Joined: July 12th, 2010, 4:38
Posts: 1420
Location: Portugal
What's your chip ID?

_________________
http://www.pclab.com.pt facebook.com/PCLAB.A.T
ACELab partner


Top
 Profile  
 
 Post subject: Re: HELP NEEDED SSD S3+ 1TB
PostPosted: February 13th, 2024, 6:26 
Offline

Joined: October 30th, 2023, 15:55
Posts: 3
Location: italy
Basic SSD information:
Read chip information : ......................: success
Chip id : ....................................: 0xAD3E1AA36325
Vendor : .....................................: Hynix
Flash type : .................................: 16nm QLC 16k
Chip capacity : ..............................: 8192 Mb
channel number : .............................: 1
Chip number per channel : ....................: 4
Chip layers : ................................: 2
Number of logical units : ....................: 1
Number of chip storage blocks : ..............: 0x1000
Number of pages per storage block : ..........: 0x100
Page size : ..................................: 0x2000
Maximum retry level : ........................: 0x0


Top
 Profile  
 
 Post subject: Re: HELP NEEDED SSD S3+ 1TB
PostPosted: February 13th, 2024, 7:01 
Offline
User avatar

Joined: July 12th, 2010, 4:38
Posts: 1420
Location: Portugal
Mine have Micron chips.

_________________
http://www.pclab.com.pt facebook.com/PCLAB.A.T
ACELab partner


Top
 Profile  
 
 Post subject: Re: HELP NEEDED SSD S3+ 1TB
PostPosted: February 14th, 2024, 16:11 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 15538
Location: Australia
Sorry for my mistake. I was confused by the silkscreening.


Attachments:
GPIO_definition.gif
GPIO_definition.gif [ 33.08 KiB | Viewed 834 times ]
JTAG.gif
JTAG.gif [ 9.38 KiB | Viewed 834 times ]

_________________
A backup a day keeps DR away.
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 8 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: Google Feedfetcher and 103 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group