2TB USB Flash

[Ihab]

Hello guys!

I have this USB flash whats marced with 2TB (i dont think its actually 2TB) and it just recognize the controller.

So i wanted to work on it with the PC3k Flash but i dont have the PIN layout..

Maybe someone of you guys would sell it to me and/or can give me some advices about this USB flash?

I am new at working with the flash so i would appreciate any advice!

Thank you!

Greets, Ihab.

Attachments

[arvika]

Let me quess... is it FC controller? Usually it use 32/64GB memory chip. Looks like common refurbished device. Pinout is the simplest part.

[Ihab]

arvika, thx for reply. I am not sure to be honest.. first time working on this fake stuff...
But i guess when i solder the pins on the multiboard.. it coukd be possible to read the information like size and Chip ID.

[arvika]

You can try check the controller and ID by ChipGenius if flash is still little alive.

[Ihab]

arvika, This is what i got:

Attachments

[arvika]

As I excpect controller is FC - Firstchip. So far I have one case with this chip - it was solved. Memory was 128GB, 6th byte addressing.

[Ihab]

arvika, i will sent you a PM.