data-medics wrote:
If you have LBA access already and terminal access, then I wouldn't bother with trying to update the firmware or anything like that. You can read system file 93 by just using y-modem and the T>r93 command. Turn off all the stuff in the SAP control flags menu, then write it back using the T>w93 command and y-modem.
If for some reason that doesn't work, you can still turn off most of those functions using the F command in terminal manually. It's a bit more complex to explain how to do that, but it should work. Just shoot me a PM if you need help. I don't mind doing a remote session sometime next week.
That should resolve the speed issues.
Thanks for Answer,
F3 T>r
HighPowerMode Status 0001 Req 0002
Overlay PartNum: 10060942
CFW PartNum: 05272014
Overlay CompileDate: 20131006
CFW CompileDate: 20140527
OverlayCompatibilityCheck failed
Unable to load Diag Cmd Processor Overlay
F3 T>F
Overlay PartNum: 10060942
CFW PartNum: 05272014
Overlay CompileDate: 20131006
CFW CompileDate: 20140527
OverlayCompatibilityCheck failed
Unable to load Diag Cmd Processor Overlay
F3 T>F,,22
Overlay PartNum: 10060942
CFW PartNum: 05272014
Overlay CompileDate: 20131006
CFW CompileDate: 20140527
OverlayCompatibilityCheck failed
Unable to load Diag Cmd Processor Overlay
It 's not accept This commands in terminal , I don't think it's different with any other terminal program
hdd firmware ignore any special command
some commands are working such as V in T level or 7>x but 7>X not working
I'll be happy for your help?thanks again