Hi to all!

Please infos. (kernel, marvell, sabre58) heap map changing

Hd wd800jd possesss two heads (head0,1), can incapacitate one of them pra to be certain if only one and bad or the two, later I come back to qualify the two heads (head0,1)

Techno mode key:
Tech on................................. : Ok

ROM:
ROM reading............................. : Ok
Heads configuration..................... : by map
Heads number............................ : 2
Heads number in use..................... : 2
Switched off heads...................... : No
Head map................................ : 0,1


later I change heads… comes back to work with head0 and head1?

Thanks advanced...

_________________
Нет ничего невозможного

When you write ROM, the message is that writing completed ok?

Sorry

not I have experience with wd, therefore I made this question before any action… if it will be able to help me…

_________________
Нет ничего невозможного

So, first of all, explain what happens when you connect the drive.

Ok!

Clicking three times and (off) disconnect ..


Thanks...

_________________
Нет ничего невозможного

So, for what you've said, it has 2 heads.
Try to disconnect one at each time and check what happens.