Hi to all,

Have this disk that when connect the first time to the udma , could save the FW, but the copy 1 was with error.

Selected family......................... : HTS4212H9
Model by ID............................. : HTS421260H9AT00

Techno mode key......................... : Ok
NV-RAM reading.......................... : Ok

Loading modules table................................................. : Ok
Loading the table of "open" modules................................... : Ok
Loading zone allocation table......................................... : Ok


Test : Resource master copy creation in DB
Folder: /HTS4212H9/HTS421260H9AT00 HA2OA70G HKA210AJGJRTRB


Reading ROM to DB (ROM/ROM.bin)....................................... : Ok

NV-RAM reading.......................... : Ok
Reading NV-RAM to DB (NV-RAM/NV-RAM.nvr).............................. : Ok

Off-line start resources
Main modules table.................................................... : Ok
"Open" modules table.................................................. : Ok
Zone allocation table................................................. : Ok

Reading modules to DB
Folder: <root>/Hitachi (IBM) Utility/HTS4212H9/HTS421260H9AT00 HA2OA70G HKA210AJGJRTRB/Modules


Module RSVD Copy 0...................... : Ok
Module RSVD Copy 1...................... : Error
Error : Module not read (RSVD)
Error : Device error detected (UNC)
Module RSVD Copy F...................... : Error
Error : Module not read (RSVD)
Error : Device error detected (INF)
Module RESF Copy 0...................... : Ok
Module RESF Copy 1...................... : Error
Error : Module not read (RESF)
Error : Device error detected (UNC)
Module RESF Copy F...................... : Ok
Module RAM0 Copy 0...................... : Ok
Module RAM0 Copy 1...................... : Error
Error : Module not read (RAM0)
Error : Device error detected (UNC)
Module RAM0 Copy F...................... : Ok
Module OVR0 Copy 0...................... : Ok
Module OVR0 Copy 1...................... : Error
Error : Module not read (OVR0)
Error : Device error detected (UNC)
Module OVR0 Copy F...................... : Ok
Module RESF(1) Copy 0................... : Ok
Module RESF(1) Copy 1................... : Error
Error : Module not read (RESF)
Error : Device error detected (UNC)
Module RESF(1) Copy F................... : Ok
Module PTCH Copy 0...................... : Ok
Module PTCH Copy 1...................... : Error
Error : Module not read (PTCH)
Error : Device error detected (UNC)
Module PTCH Copy F...................... : Ok
Module CNS1 Copy 0...................... : Ok
Module CNS1 Copy 1...................... : Error
Error : Module not read (CNS1)
Error : Device error detected (UNC)
Module CNS1 Copy F...................... : Ok
Module RWCN Copy 0...................... : Ok
Module RWCN Copy 1...................... : Error
Error : Module not read (RWCN)
Error : Device error detected (UNC)
Module RWCN Copy F...................... : Ok
Module ZONE Copy 0...................... : Ok
Module ZONE Copy 1...................... : Error
Error : Module not read (ZONE)
Error : Device error detected (UNC)
Module ZONE Copy F...................... : Ok
Module PTRT Copy 0...................... : Ok
Module PTRT Copy 1...................... : Error
Error : Module not read (PTRT)
Error : Device error detected (UNC)
Module PTRT Copy F...................... : Ok
Module SRVP Copy 0...................... : Ok
Module SRVP Copy 1...................... : Error
Error : Module not read (SRVP)
Error : Device error detected (UNC)
Module SRVP Copy F...................... : Ok
Module SRVM Copy 0...................... : Ok
Module SRVM Copy 1...................... : Error
Error : Module not read (SRVM)
Error : Device error detected (UNC)
Module SRVM Copy F...................... : Ok
Module CHNL Copy 0...................... : Ok
Module CHNL Copy 1...................... : Error
Error : Module not read (CHNL)
Error : Device error detected (UNC)
Module CHNL Copy F...................... : Ok
Module IDNT Copy 0...................... : Ok
Module IDNT Copy 1...................... : Error
Error : Module not read (IDNT)
Error : Device error detected (UNC)
Module IDNT Copy F...................... : Ok
Module SN00 Copy 0...................... : Ok
Module SN00 Copy 1...................... : Error
Error : Module not read (SN00)
Error : Device error detected (UNC)
Module SN00 Copy F...................... : Ok
Module MISC Copy 0...................... : Ok
Module MISC Copy 1...................... : Error
Error : Module not read (MISC)
Error : Device error detected (UNC)
Module MISC Copy F...................... : Ok
Module ICES Copy 0...................... : Ok
Module ICES Copy 1...................... : Error
Error : Module not read (ICES)
Error : Device error detected (UNC)
Module ICES Copy F...................... : Ok
Module MLBA Copy 0...................... : Ok
Module MLBA Copy 1...................... : Error
Error : Module not read (MLBA)
Error : Device error detected (UNC)
Module MLBA Copy F...................... : Ok
Module QMCN Copy 0...................... : Ok
Module QMCN Copy 1...................... : Error
Error : Module not read (QMCN)
Error : Device error detected (UNC)
Module QMCN Copy F...................... : Ok
Module SMRT Copy 0...................... : Ok
Module SMRT Copy 1...................... : Error
Error : Module not read (SMRT)
Error : Device error detected (UNC)
Module SMRT Copy F...................... : Ok
Module PNID Copy 0...................... : Ok
Module PNID Copy 1...................... : Error
Error : Module not read (PNID)
Error : Device error detected (UNC)
Module PNID Copy F...................... : Ok
Module ABLP Copy 0...................... : Ok
Module ABLP Copy 1...................... : Error
Error : Module not read (ABLP)
Error : Device error detected (UNC)
Module ABLP Copy F...................... : Ok
Module ABLD Copy 0...................... : Ok
Module ABLD Copy 1...................... : Error
Error : Module not read (ABLD)
Error : Device error detected (UNC)
Module ABLD Copy F...................... : Ok
Module SSTL Copy 0...................... : Ok
Module SSTL Copy 1...................... : Error
Error : Module not read (SSTL)
Error : Device error detected (UNC)
Module SSTL Copy F...................... : Ok
Module SERL Copy 0...................... : Ok
Module SERL Copy 1...................... : Error
Error : Module not read (SERL)
Error : Device error detected (UNC)
Module SERL Copy F...................... : Ok
Module SSST Copy 0...................... : Ok
Module SSST Copy 1...................... : Error
Error : Module not read (SSST)
Error : Device error detected (UNC)
Module SSST Copy F...................... : Ok
Module DCOT Copy 0...................... : Ok
Module DCOT Copy 1...................... : Error
Error : Module not read (DCOT)
Error : Device error detected (UNC)
Module DCOT Copy F...................... : Ok
Module SRIF Copy 0...................... : Ok
Module SRIF Copy 1...................... : Error
Error : Module not read (SRIF)
Error : Device error detected (UNC)
Module SRIF Copy F...................... : Ok
Module ALTT Copy 0...................... : Ok
Module ALTT Copy 1...................... : Error
Error : Module not read (ALTT)
Error : Device error detected (UNC)
Module ALTT Copy F...................... : Ok
Module RDMT Copy 0...................... : Ok
Module RDMT Copy 1...................... : Error
Error : Module not read (RDMT)
Error : Device error detected (UNC)
Module RDMT Copy F...................... : Error
Error : Module not read (RDMT)
Error : Device error detected (UNC)
Module RELI Copy 0...................... : Ok
Module RELI Copy 1...................... : Error
Error : Module not read (RELI)
Error : Device error detected (UNC)
Module RELI Copy F...................... : Error
Error : Module not read (RELI)
Error : Device error detected (UNC)
Module PSHT Copy 0...................... : Ok
Module PSHT Copy 1...................... : Error
Error : Module not read (PSHT)
Error : Device error detected (UNC)
Module PSHT Copy F...................... : Error
Error : Module not read (PSHT)
Error : Device error detected (UNC)
Module OVR1 Copy 0...................... : Ok
Module OVR1 Copy 1...................... : Error
Error : Module not read (OVR1)
Error : Device error detected (UNC)
Module SPRE Copy 0...................... : Error
Error : Module not read (SPRE)
Error : Device error detected (UNC)
Module SPRE Copy 1...................... : Error
Error : Module not read (SPRE)
Error : Device error detected (UNC)
Module PESD............................. : Ok
Module MFGP............................. : Error
Error : Module not read (MFGP)
Error : Device error detected (UNC)
Module SRST............................. : Ok
Module FLOG............................. : Ok
Module DUMP............................. : Ok
Module ELG1............................. : Ok
Module ELG2............................. : Error
Error : Module not read (ELG2)
Error : Device error detected (UNC)
Module EVLG............................. : Ok
Module PIDM............................. : Ok
Module AMPM............................. : Error
Error : Module not read (AMPM)
Error : Device error detected (UNC)
Module HLR1............................. : Ok
Module HLR2............................. : Error
Error : Module not read (HLR2)
Error : Device error detected (UNC)
Module MFGT............................. : Ok
Module DDD0............................. : Error
Error : Module not read (DDD0)
Error : Device error detected (UNC)
Module MRDM............................. : Error
Error : Module not read (MRDM)
Error : Device error detected (UNC)
Module DIAG............................. : Error
Error : Module not read (DIAG)
Error : Device error detected (UNC)
Module WRT0............................. : Error
Error : Module not read (WRT0)
Error : Device error detected (UNC)
Module WRT1............................. : Error
Error : Module not read (WRT1)
Error : Device error detected (UNC)
Module @@01............................. : Error
Error : Module not read (@@01)
Error : Device error detected (UNC)
Modules reading completed
Saving modules by copies.............................................. : Error

Saving SA report to file SAReport_0_1_F.txt

...


NV-RAM reading.......................... : Ok

Module checking


...

Reading modules to DB (composite)
Folder: <root>/Hitachi (IBM) Utility/HTS4212H9/HTS421260H9AT00 HA2OA70G HKA210AJGJRTRB/Modules

Module RSVD............................. : Ok
Module RESF............................. : Ok
Module RAM0............................. : Ok
Module OVR0............................. : Ok
Module RESF(1).......................... : Ok
Module PTCH............................. : Ok
Module CNS1............................. : Ok
Module RWCN............................. : Ok
Module ZONE............................. : Ok
Module PTRT............................. : Ok
Module SRVP............................. : Ok
Module SRVM............................. : Ok
Module CHNL............................. : Ok
Module IDNT............................. : Ok
Module SN00............................. : Ok
Module MISC............................. : Ok
Module ICES............................. : Ok
Module MLBA............................. : Ok
Module QMCN............................. : Ok
Module SMRT............................. : Ok
Module PNID............................. : Ok
Module ABLP............................. : Ok
Module ABLD............................. : Ok
Module SSTL............................. : Ok
Module SERL............................. : Ok
Module SSST............................. : Ok
Module DCOT............................. : Ok
Module SRIF............................. : Ok
Module ALTT............................. : Ok
Module RDMT............................. : Ok
Module RELI............................. : Ok
Module PSHT............................. : Ok
Module OVR1............................. : Ok
Module not read (SPRE)
Error : Device error detected (UNC)
Module not read (SPRE)
Error : Device error detected (UNC)
Device error detected (UNC)
Device error detected (UNC)
Module SPRE............................. : Error
Error : ModStg: composite reading impossible - reading error!
Module PESD............................. : Ok
Module MFGP............................. : Error
Error : Module not read (MFGP)
Error : Device error detected (UNC)
Module SRST............................. : Ok
Module FLOG............................. : Ok
Module DUMP............................. : Ok
Module ELG1............................. : Ok
Module ELG2............................. : Error
Error : Module not read (ELG2)
Error : Device error detected (UNC)
Module EVLG............................. : Ok
Module PIDM............................. : Ok
Module AMPM............................. : Error
Error : Module not read (AMPM)
Error : Device error detected (UNC)
Module HLR1............................. : Ok
Module HLR2............................. : Error
Error : Module not read (HLR2)
Error : Device error detected (UNC)
Module MFGT............................. : Ok
Module DDD0............................. : Error
Error : Module not read (DDD0)
Error : Device error detected (UNC)
Module MRDM............................. : Error
Error : Module not read (MRDM)
Error : Device error detected (UNC)
Module DIAG............................. : Error
Error : Module not read (DIAG)
Error : Device error detected (UNC)
Module WRT0............................. : Error
Error : Module not read (WRT0)
Error : Device error detected (UNC)
Module WRT1............................. : Error
Error : Module not read (WRT1)
Error : Device error detected (UNC)
Module @@01............................. : Error
Error : Module not read (@@01)
Error : Device error detected (UNC)
Modules reading completed
Saving modules (composite)............................................ : Error

Backup of service information completed





Them i open DE and make a head map, and star copy with head 0, and could copy only 2 224 366 sectors them the disk start copy yellow. i turn off and now the disk click., i think the heads are gone, can i do here something with the FE that i made backup?

Thanks
ZeBong

_________________
ZeBong
" что случилось в России - останется в России "
" Россия еще раз"

H1 is bad.

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!

definitely.
pepe

_________________
Adatmentés - Data recovery

Thanks Sean and Pepe,

I Start to clone just with head 0, i could clone it about 2 224 366 sectors, but now i can not get the disk ID with the umda, i have saved the FW to the database when the disk was reading, is possible that head 0 is gone also ?

Thanks
ZeBong

_________________
ZeBong
" что случилось в России - останется в России "
" Россия еще раз"

can be.

I would check the condition of heads and the platter.

pepe

_________________
Adatmentés - Data recovery

I had come across 30 to 50 similar situations. I think the problem is platter damage. You try to swap new head stack and forced read, eventually all will be crashed.

You may try this:

Start up the pc3K. Leave the menu screen on.
Start DE. Select read mode to be "utility".

While capturing the image, if you see red/black bitmap, do to PC3K util and do a query on util status or perform a read rom.
If the condition permits, you may be able to capture some data before it failed completely.
When you do such switching, system will hang so need to be patient.

I only had some success in a few cases and hope this will work for you too.

Thanks for the info,

But when i give power to the disk it start clicking a lot and now i dont have ID, the udma can not detect the disk.

_________________
ZeBong
" что случилось в России - останется в России "
" Россия еще раз"

If you swap in new head stack, you may get a bit more or you may crash the new head stack. Not much option left now.
This Hitachi Model is not a favorable model for DR company