All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 11 posts ] 
Author Message
 Post subject: ST980011A - 80gb pata
PostPosted: September 12th, 2009, 7:59 
Offline
User avatar

Joined: December 24th, 2007, 16:08
Posts: 1420
Location: EUROPE
Hi to all,

Have this in a seagate disk


Interface task reset
1024k x 16 buffer detected
ALPINE - 1_Disk M-21 11-25-03 18:53
Head Mask FFFF - Switch to full int.
Spin Ready
Application code incompatible with serial flash code

F>




Anyone can give an opinion what can i do here,


Thanks
ZeBong

_________________
ZeBong
" что случилось в России - останется в России "
" Россия еще раз"


Top
 Profile  
 
 Post subject: Re: ST980011A - 80gb pata
PostPosted: September 12th, 2009, 9:27 
Offline

Joined: October 3rd, 2005, 0:40
Posts: 4335
Location: Hungary
Somebody swapped the pcb and forgot to swap it back...

_________________
Adatmentés - Data recovery


Top
 Profile  
 
 Post subject: Re: ST980011A - 80gb pata
PostPosted: September 12th, 2009, 11:17 
Offline

Joined: November 9th, 2006, 15:15
Posts: 2983
You need either the original PCB or its ROM, or as I believe there is no adaptive information on old Seagates, so you could get lucky with an exact matching PCB with same ROM.

Personally, best bet is to ask for native PCB.


Top
 Profile  
 
 Post subject: Re: ST980011A - 80gb pata
PostPosted: September 12th, 2009, 11:24 
Offline

Joined: June 27th, 2006, 11:33
Posts: 2287
Location: In ur HDD !
What is the firmware on drive ?


Top
 Profile  
 
 Post subject: Re: ST980011A - 80gb pata
PostPosted: September 12th, 2009, 11:28 
Offline
User avatar

Joined: December 24th, 2007, 16:08
Posts: 1420
Location: EUROPE
Thanks,


Yes i know i will get lucky in find the same PCB, but i have almost 12 all different from this one.


The FW is 3.06.

_________________
ZeBong
" что случилось в России - останется в России "
" Россия еще раз"


Top
 Profile  
 
 Post subject: Re: ST980011A - 80gb pata
PostPosted: September 12th, 2009, 17:56 
Offline

Joined: June 27th, 2006, 11:33
Posts: 2287
Location: In ur HDD !
You need pcb with M14 code .


Top
 Profile  
 
 Post subject: Re: ST980011A - 80gb pata
PostPosted: September 12th, 2009, 19:33 
Offline
User avatar

Joined: December 24th, 2007, 16:08
Posts: 1420
Location: EUROPE
rameez wrote:
You need pcb with M14 code .


Hi, yes i think i try that one and did not work the same appear in terminal.

i will try it and post here the logs in terminal.

_________________
ZeBong
" что случилось в России - останется в России "
" Россия еще раз"


Top
 Profile  
 
 Post subject: Re: ST980011A - 80gb pata
PostPosted: September 13th, 2009, 4:46 
Offline

Joined: June 27th, 2006, 11:33
Posts: 2287
Location: In ur HDD !
Try S15 also .


Top
 Profile  
 
 Post subject: Re: ST980011A - 80gb pata
PostPosted: September 13th, 2009, 7:51 
Offline
User avatar

Joined: August 9th, 2007, 8:40
Posts: 789
Location: United Kingdom
Or you could load the existing ROM with correct ROM from another drive or resource file.

_________________
If you can keep your head when all about you are losing theirs, you probably don't fully understand the situation. ... Mr Kipling

https://www.mjm.co.uk/


Top
 Profile  
 
 Post subject: Re: ST980011A - 80gb pata
PostPosted: September 15th, 2009, 12:02 
Offline
User avatar

Joined: December 24th, 2007, 16:08
Posts: 1420
Location: EUROPE
Thanks to all,

Patient is : 100282774 F 6514GSAY

Interface task reset
1024k x 16 buffer detected
ALPINE - 1_Disk M-21 11-25-03 18:53

Buzz - Head Mask FFFF - Switch to full int.
Spin Ready
Application code incompatible with serial flash code

F>


i try this one 100282774 C 64119VMM

i have this in terminal

Interface task reset
1024k x 16 buffer detected
ALPINE - 1_Disk M.14 01-16-03 11:51
Head Mask 0000 - Switch to full int.
Spin Ready
Application code incompatible with serial flash code

F>


Them i try this one : 100282774 E 343247AX

Interface task reset
1024k x 16 buffer detected
ALPINE - 1_Disk M.14 01-16-03 11:51
Head Mask 0000 - Switch to full int.
Spin Ready
Application code incompatible with serial flash code

F>

LAST ONE : 100282774 E 3425YQ6M

Interface task reset
1024k x 16 buffer detected
ALPINE - 1_Disk M.14 01-16-03 11:51

Buzz - Head Mask 0000 - Switch to full int.
Spin Ready
Application code incompatible with serial flash code

F>


and i dont have a loader for the M-21

_________________
ZeBong
" что случилось в России - останется в России "
" Россия еще раз"


Top
 Profile  
 
 Post subject: Re: ST980011A - 80gb pata
PostPosted: September 15th, 2009, 13:35 
Offline
User avatar

Joined: December 24th, 2007, 16:08
Posts: 1420
Location: EUROPE
THANKS

S-15 SOLVE :D

_________________
ZeBong
" что случилось в России - останется в России "
" Россия еще раз"


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 11 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 24 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group