THANKS
S-15 SOLVE
| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| ST980011A - 80gb pata http://forum.hddguru.com/viewtopic.php?f=11&t=13352 |
Page 1 of 1 |
| Author: | zebong [ September 12th, 2009, 7:59 ] |
| Post subject: | ST980011A - 80gb pata |
Hi to all, Have this in a seagate disk Interface task reset 1024k x 16 buffer detected ALPINE - 1_Disk M-21 11-25-03 18:53 Head Mask FFFF - Switch to full int. Spin Ready Application code incompatible with serial flash code F> Anyone can give an opinion what can i do here, Thanks ZeBong |
|
| Author: | pepe [ September 12th, 2009, 9:27 ] |
| Post subject: | Re: ST980011A - 80gb pata |
Somebody swapped the pcb and forgot to swap it back... |
|
| Author: | hddguy [ September 12th, 2009, 11:17 ] |
| Post subject: | Re: ST980011A - 80gb pata |
You need either the original PCB or its ROM, or as I believe there is no adaptive information on old Seagates, so you could get lucky with an exact matching PCB with same ROM. Personally, best bet is to ask for native PCB. |
|
| Author: | rameez [ September 12th, 2009, 11:24 ] |
| Post subject: | Re: ST980011A - 80gb pata |
What is the firmware on drive ? |
|
| Author: | zebong [ September 12th, 2009, 11:28 ] |
| Post subject: | Re: ST980011A - 80gb pata |
Thanks, Yes i know i will get lucky in find the same PCB, but i have almost 12 all different from this one. The FW is 3.06. |
|
| Author: | rameez [ September 12th, 2009, 17:56 ] |
| Post subject: | Re: ST980011A - 80gb pata |
You need pcb with M14 code . |
|
| Author: | zebong [ September 12th, 2009, 19:33 ] |
| Post subject: | Re: ST980011A - 80gb pata |
rameez wrote: You need pcb with M14 code . Hi, yes i think i try that one and did not work the same appear in terminal. i will try it and post here the logs in terminal. |
|
| Author: | rameez [ September 13th, 2009, 4:46 ] |
| Post subject: | Re: ST980011A - 80gb pata |
Try S15 also . |
|
| Author: | scratchy [ September 13th, 2009, 7:51 ] |
| Post subject: | Re: ST980011A - 80gb pata |
Or you could load the existing ROM with correct ROM from another drive or resource file. |
|
| Author: | zebong [ September 15th, 2009, 12:02 ] |
| Post subject: | Re: ST980011A - 80gb pata |
Thanks to all, Patient is : 100282774 F 6514GSAY Interface task reset 1024k x 16 buffer detected ALPINE - 1_Disk M-21 11-25-03 18:53 Buzz - Head Mask FFFF - Switch to full int. Spin Ready Application code incompatible with serial flash code F> i try this one 100282774 C 64119VMM i have this in terminal Interface task reset 1024k x 16 buffer detected ALPINE - 1_Disk M.14 01-16-03 11:51 Head Mask 0000 - Switch to full int. Spin Ready Application code incompatible with serial flash code F> Them i try this one : 100282774 E 343247AX Interface task reset 1024k x 16 buffer detected ALPINE - 1_Disk M.14 01-16-03 11:51 Head Mask 0000 - Switch to full int. Spin Ready Application code incompatible with serial flash code F> LAST ONE : 100282774 E 3425YQ6M Interface task reset 1024k x 16 buffer detected ALPINE - 1_Disk M.14 01-16-03 11:51 Buzz - Head Mask 0000 - Switch to full int. Spin Ready Application code incompatible with serial flash code F> and i dont have a loader for the M-21 |
|
| Author: | zebong [ September 15th, 2009, 13:35 ] |
| Post subject: | Re: ST980011A - 80gb pata |
THANKS S-15 SOLVE
|
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|