fzabkar wrote:
Here is an example where we extract the loader from the 0021LVM1 Lenovo firmware update for 5400.6 Momentus drives. It is included in the FWSH43 package (47MB):
http://support.lenovo.com/us/en/downloads/ds003740Hi, sorry for bumping old topic and a little bit offtop, but how did you extract FW from Lenovo package?
I am running an a very old HDD, but SMART is showing something strange:
Code:
=== START OF INFORMATION SECTION ===
Model Family: Seagate Momentus 5400.6
Device Model: ST9250315AS
Serial Number: 6VC4JD1F
LU WWN Device Id: 5 000c50 027a28699
Firmware Version: 0020LVM1
User Capacity: 250 059 350 016 bytes [250 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 5400 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Sat May 26 23:30:14 2018 MSK
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 118 099 034 Pre-fail Always - 176154479
3 Spin_Up_Time 0x0003 099 099 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 096 096 020 Old_age Always - 4317
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 066 060 030 Pre-fail Always - 167648406562
9 Power_On_Hours 0x0032 084 084 000 Old_age Always - 14074 (117 244 0)
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 096 096 020 Old_age Always - 4317
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 088 088 000 Old_age Always - 12
188 Command_Timeout 0x0032 100 096 000 Old_age Always - 1244
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 058 044 045 Old_age Always In_the_past 42 (Min/Max 32/42 #13)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 134
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 45
193 Load_Cycle_Count 0x0032 091 091 000 Old_age Always - 18663
194 Temperature_Celsius 0x0022 042 056 000 Old_age Always - 42
195 Hardware_ECC_Recovered 0x001a 046 040 000 Old_age Always - 176154479
196 Reallocated_Event_Count 0x000f 084 084 030 Pre-fail Always - 14031 (50140 0)
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
I am not sure if my hdd SMART-tool correctly interpretate SMART data of my hdd with an old firmware, I have already buy a new hdd, but want to update a FW to the latest one to become sure if it is dead...
Unfortunately my ODD seems to be also dead, and I couldn't run the burnd ISO, I also tried to run ISO from grub bootloader, but also faild, so I want to try updating via hdparm but need the firmware file for that.