Hi gurus,
anyone know how to fix a SED DRIVE LOCKED DRIVE ?



Thanks to everyone

PC3000 can do it if you have a recent version.

http://forum.acelaboratory.com/viewtopi ... 155&t=8555

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!

Thanks for this quick reply, anyway i have some problem with Load DIR in RAM, this phase fails:

Techno mode key
Techno mode key......................... : Ok

RAM:
HDD Info reading........................ : Ok
Heads number............................ : 2
Cyl Count............................... : 256

ROM:
Read ROM................................ : Ok
ROM Data size........................... : 256 Kb
Flash ROM dir reading................... : Ok (Active)
Flash ROM dir reading (Ext)............. : Ok
Modules directory address............... : 62 577
SA regions address...................... : shifted
SA Translator loading................... : Ok

ROM Modules:
ROM version............................. : 02.4CN
ROM F/W version......................... : 0002004C
Overlay F/W version..................... : 02.4CN
Servo F/W version....................... : 02.10

Heads configuration..................... : by map
Heads number............................ : 2
Heads number in use..................... : 2
Switched off heads...................... : No
Heads map............................... : 0,1


Module (0001) read error Module ID 01 reading error Data request error - Device Error Detected: "Unknown error code: 51AD"


This drive reads some sectors but this is very slow and do many badsectors on reading, i cannot do the headmap because the utility show this SED error in RAM.

Any ideas?

I don't know how, but suddenly works, i can't figure why...
anyway thank you pcimage!!!