I have Seagate ST1000DM003 hdd showing 32 MB size only .....running smoothly no sound

terminal shows following details when we power on the hdd :-

Boot 0x40M
Spin Up[0x000065B4][0x00006A20][0x00006E8C]
Trans.

Rst 0x40M
MC Internal LPC Process
Spin Up
(P) SATA Reset

MCMainPOR: Start:
Check MCMT Version: Current
MCMainPOR: Non-Init Case
MC Seg Disc and Cache Nodes: 40125B28 40122F00
Seg Write Preamble VBM start: 0000204A end: 00002091
Footer - start: 00002093 end: 000020DA
Seg Read Preamble VBM - start: 000020DC end: 00002123
Footer - start: 00002125 end: 0000216C
Reconstruction: MCMT Reconstruction Start
Max number of MC segments 0A61
Nonvolatile MCMT sequence number 010AA616
[RSRS] 03C6
Reconstruction: Completed 0: HeadPtr was unwritten
[MCMTWS]
MCMainPOR: MCTBufferPtr->Header.MCStateFlagsDisc = 00000041
MCMainPOR: MCTBufferPtr->Header.MCTStateFlags = 0000002A
MCMainPOR: MCStateFlags = 00000041

MCMainPOR: Feature Enabled...

PowerState = IDLE1
PowerState = IDLE2


Any help appreciated

Hello!

Do you have terminal access ?

Well,
Are You Interested To Work With a Lab Thats Good With Physical HDD Work .If Yes You Can Count Me In .I am Aware That You Were Outsourcing Some Physical Cases To a Company And i Can Do a Much Better Job For Those .As Far As This Job Is Concerned We Can Try Firmware Manupulation By Blocking Access Initially And If it works then no issue ,Otherwise We Can Change Your Heads .

PS : If You Have Started To Do Physically Work Yourself Let Me Know So That i can help you with some techniques Etc

_________________
Regards
Amarbir S Dhillon , Chandigarh Data Recovery Labs [India]
Logical,Semi Physical And Physical Data Recovery
Website-> http://www.chandigarhdatarecovery.com