Hi guys,
I've this WD10JMVW that giving me some issue. It initialized correctly/ fully, HDD ID is correct and SA is accessible but data area is not.
Head test shows Head# 1 is giving problem. Followed through
http://blog.acelaboratory.com/ram-head- ... -case.html guideline, changed head map in RAM to 0 0 2 3 without avail.
Tried it in DDI 4 imager, skipped Head# 1 and it shows Read Timeout for all sectors. Matter of fact, it shows Read Timeout no matter which head we skipped.
Attempts to regenerate Translator throws following error
Translator regeneration
Regeneration method..................... : Use P-List only
P-List Copy 0........................... : Ok
P-List Copy 2........................... : No copy exists
P-List Copy 3........................... : No copy exists
Error Code : 3C1D....................... : FMT ERR FLIST WRT FAIL
Module check show the mod 31 is good though. Found this
https://forum.hddguru.com/viewtopic.php ... 95&start=0 in the forum. Is this something that I can attempt on this HDD?
Thanks in advance.
Best Regards,
Darecom