HDD GURU FORUMS :: View topic

Spildit wrote:

http://forum.hddguru.com/viewtopic.php?f=28&t=34949

Quote:

Do you have any solutions to edit HDD ID (SN & Model info) for WD SAS drive?

Looks like our friend here is looking for a way to edit Model and SN on WD SAS drives....

Most likely that is the reason why he is looking for a SAS tool.

Yes, we had place the order for PC3K-SAS. I did check the blog ACE list support, found no WD SAS support.
We wish to edit the SN & Model for WD SAS drives. Anyone have solutions, please PM me. We will pay the service charge if success.

WD SAS:
3TB
Model is WD3001FYYG

Thanks for other member reply. Appreciate it.

Author:	ihddCloud [ February 7th, 2017, 5:07 ]
Post subject:	PC3K-SAS
Hi, Would like to ask, PC3K-SAS support WD SAS HDD? Thanks

Author:	Tomset [ February 7th, 2017, 5:39 ]
Post subject:	Re: PC3K-SAS
http://blog.acelaboratory.com/pc-3000-s ... rives.html

Author:	RoninColdSteel [ February 7th, 2017, 7:45 ]
Post subject:	Re: PC3K-SAS
There's no WD in the blog post, but you can ask ACE support.

Author:	data-medics [ February 7th, 2017, 9:41 ]
Post subject:	Re: PC3K-SAS
I'm sure it'll support imaging a WD SAS through Data Extractor. I've never seen or heard of a WD SAS drive with a firmware problem, to be honest. In fact, it's fairly rare across most all SAS drives. Usually they are just catastrophic failures, or bad sectors, occasionally bad heads.

Author:	data-medics [ February 7th, 2017, 10:37 ]
Post subject:	Re: PC3K-SAS
Ah, the old trick of trying to fool your RAID into thinking it's the original drive.

HDD GURU FORUMS http://forum.hddguru.com/

PC3K-SAS http://forum.hddguru.com/viewtopic.php?f=11&t=34948	Page 1 of 1

Author:	ihddCloud [ February 7th, 2017, 21:30 ]
Post subject:	Re: PC3K-SAS
Spildit wrote: http://forum.hddguru.com/viewtopic.php?f=28&t=34949 Quote: Do you have any solutions to edit HDD ID (SN & Model info) for WD SAS drive? Looks like our friend here is looking for a way to edit Model and SN on WD SAS drives.... Most likely that is the reason why he is looking for a SAS tool. Yes, we had place the order for PC3K-SAS. I did check the blog ACE list support, found no WD SAS support. We wish to edit the SN & Model for WD SAS drives. Anyone have solutions, please PM me. We will pay the service charge if success. WD SAS: 3TB Model is WD3001FYYG Thanks for other member reply. Appreciate it.

Author:	roger9 [ August 11th, 2018, 20:59 ]
Post subject:	Re: PC3K-SAS
Probably you will get an error even you would change s/n and name of disk. An error comes as techno key would not pass as pc 3000 does know it for the original disk. Thats the issue not the name of a disk. It would probably look llike literaly as you try to open with a wrong key no matter the lock looks like the same - lock key mechanism has not the same sequence as your native lock has it on ihddCloud wrote: Spildit wrote: http://forum.hddguru.com/viewtopic.php?f=28&t=34949 Quote: Do you have any solutions to edit HDD ID (SN & Model info) for WD SAS drive? Looks like our friend here is looking for a way to edit Model and SN on WD SAS drives.... Most likely that is the reason why he is looking for a SAS tool. Yes, we had place the order for PC3K-SAS. I did check the blog ACE list support, found no WD SAS support. We wish to edit the SN & Model for WD SAS drives. Anyone have solutions, please PM me. We will pay the service charge if success. WD SAS: 3TB Model is WD3001FYYG Thanks for other member reply. Appreciate it.

Page 1 of 1	All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/