HDD GURU FORUMS http://forum.hddguru.com/ |
|
PC3K-SAS http://forum.hddguru.com/viewtopic.php?f=11&t=34948 |
Page 1 of 1 |
Author: | ihddCloud [ February 7th, 2017, 5:07 ] |
Post subject: | PC3K-SAS |
Hi, Would like to ask, PC3K-SAS support WD SAS HDD? Thanks |
Author: | Tomset [ February 7th, 2017, 5:39 ] |
Post subject: | Re: PC3K-SAS |
http://blog.acelaboratory.com/pc-3000-s ... rives.html |
Author: | RoninColdSteel [ February 7th, 2017, 7:45 ] |
Post subject: | Re: PC3K-SAS |
There's no WD in the blog post, but you can ask ACE support. |
Author: | data-medics [ February 7th, 2017, 9:41 ] |
Post subject: | Re: PC3K-SAS |
I'm sure it'll support imaging a WD SAS through Data Extractor. I've never seen or heard of a WD SAS drive with a firmware problem, to be honest. In fact, it's fairly rare across most all SAS drives. Usually they are just catastrophic failures, or bad sectors, occasionally bad heads. |
Author: | data-medics [ February 7th, 2017, 10:37 ] |
Post subject: | Re: PC3K-SAS |
Ah, the old trick of trying to fool your RAID into thinking it's the original drive. |
Author: | ihddCloud [ February 7th, 2017, 21:30 ] |
Post subject: | Re: PC3K-SAS |
Spildit wrote: http://forum.hddguru.com/viewtopic.php?f=28&t=34949 Quote: Do you have any solutions to edit HDD ID (SN & Model info) for WD SAS drive? Looks like our friend here is looking for a way to edit Model and SN on WD SAS drives.... Most likely that is the reason why he is looking for a SAS tool. Yes, we had place the order for PC3K-SAS. I did check the blog ACE list support, found no WD SAS support. We wish to edit the SN & Model for WD SAS drives. Anyone have solutions, please PM me. We will pay the service charge if success. WD SAS: 3TB Model is WD3001FYYG Thanks for other member reply. Appreciate it. |
Author: | roger9 [ August 11th, 2018, 20:59 ] |
Post subject: | Re: PC3K-SAS |
Probably you will get an error even you would change s/n and name of disk. An error comes as techno key would not pass as pc 3000 does know it for the original disk. Thats the issue not the name of a disk. It would probably look llike literaly as you try to open with a wrong key no matter the lock looks like the same - lock key mechanism has not the same sequence as your native lock has it on ihddCloud wrote: Spildit wrote: http://forum.hddguru.com/viewtopic.php?f=28&t=34949 Quote: Do you have any solutions to edit HDD ID (SN & Model info) for WD SAS drive? Looks like our friend here is looking for a way to edit Model and SN on WD SAS drives.... Most likely that is the reason why he is looking for a SAS tool. Yes, we had place the order for PC3K-SAS. I did check the blog ACE list support, found no WD SAS support. We wish to edit the SN & Model for WD SAS drives. Anyone have solutions, please PM me. We will pay the service charge if success. WD SAS: 3TB Model is WD3001FYYG Thanks for other member reply. Appreciate it. |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |