All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 3 posts ] 
Author Message
 Post subject: Case 1TB Helios
PostPosted: February 21st, 2017, 9:02 
Offline

Joined: August 3rd, 2012, 7:47
Posts: 394
Location: slovenija
Hello,

I convert drive from USB to SATA trasnfer ROM and replace heads on Helios 1TB drive.
Drive is ready and I start imaging to another drive connected to SATA1 port PC3000 UDMA
On the begining process was slow, then run smoothly, now is slow again. I was able to image about 20% of drive. Now it reads some few k OK, then some part not read (few 100). If I stop process and turn off and on and start process it reread unread part ok, but very quick become unstable (read/skip).
Currently reading 128 skip sectors 48
I try also to disable some of heads without success.
Question. Could be reason of such behavior heads or something else.
And if I stop process, replace heads with new one, how is with destination drive. Could I connect it to USB or internal SATA conector instead of SATA1 port of PC3000, or it needs to be connected on SATA 1 port of PC3000. How DE handles task.

Thank you


Top
 Profile  
 
 Post subject: Re: Case 1TB Helios
PostPosted: February 21st, 2017, 10:11 
Offline

Joined: March 19th, 2015, 15:01
Posts: 1387
Location: isreal
Check the heads under a microscope, sounds contamination to me


Top
 Profile  
 
 Post subject: Re: Case 1TB Helios
PostPosted: February 21st, 2017, 13:58 
Offline

Joined: August 3rd, 2012, 7:47
Posts: 394
Location: slovenija
thank you jermy


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: Google [Bot] and 8 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group