HDD GURU FORUMS
http://forum.hddguru.com/

ST4000LM016-1N2170 BSY
http://forum.hddguru.com/viewtopic.php?f=11&t=35194
Page 1 of 1

Author:  Protech [ March 28th, 2017, 4:23 ]
Post subject:  ST4000LM016-1N2170 BSY

Hi Guys,

I got a ST4000LM016-1N2170 here. Drive gets DRD DSC and does ID fine with Model, Serial Capacity and all.
I know these drives have their ports locked, at least on my version of PC3K. I have tried to read Sys file 93 and clear media cache but every thing I try sends it to BSY.
Terminel starts like this:

Boot 0x80M
RECOV Servo Op=0095 Resp=0005[LBA=0x00000001]
(P) SATA Reset

RAW OFF
PASS
(DOS Table) Worst Count: 00001AC2 At SU: 001F026A
Last Used Segment Found:
MSP POR10
Intel 6G->3G
Send Status: COMRESET seen
CSpd= 3Gbps
DSC
[BRO - 0002] 173484C0 - 17348F97
[BRO - 0002] 0772962F - 077297AC
(DOS) SU:00288318 Adjusted BRO: 00000C4318 - 00000C448F
[BRO - 0002] 000C4318 - 000C448F
[BRO - 0002] 07029B74 - 0702B3B3
PrgF
LED:0x000000BD FAddr:0x00009887

LED:0x000000BD FAddr:0x00009887

LED:0x000000BD FAddr:0x00009887


Any help is greatly appreciated.

Author:  Martin [ March 28th, 2017, 5:51 ]
Post subject:  Re: ST4000LM016-1N2170 BSY

For these locked drives there is no shared methods still. Ask pepe for help.

Author:  Protech [ March 28th, 2017, 6:35 ]
Post subject:  Re: ST4000LM016-1N2170 BSY

Thanks Martin. I shall PM Pepe then.

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/