ST500LT012 - LED:000000BC FAddr:00007A43 stuck on bsy

[LostDataSa]

I have ST500LT012 the drive spin for few second then stop and the head is moving (not stuck). then it gets DRD DSC.
but when I try to read ID i stuck on BSY DRD DSC until I power OFF/ON the hdd.

and when I start utilities this is what I get:

LED:000000BC FAddr:00007A43

and after repowering I get in the terminal:

Rst 0x10M
SPINUP FAILED
ExecuteSpinRequest
op=0100 resp=0007
op=0100 resp=0007
LED:000000BC FAddr:00007A43
LED:000000BC FAddr:00007A43
CfwDiscCode Not Loaded: 0002B4E0
LED:000000BC FAddr:00007A43

[Martin]

LED:000000BC FAddr:00007A43
CfwDiscCode Not Loaded: 0002B4E0

Overlay wasn't loaded. Probably, due to some damages in SA.

[LostDataSa]

I suspect bad media but I'm curious why the "SPINUP FAILED" message. The drive spins up fine with HDA isolated, so it's not seized spindle.

[Martin]

Because this massage relates to servo recalibration, not to SPIN UP literally. And yes, you have to think about heads replacement, current heads are not good with big probability.