HDD GURU FORUMS http://forum.hddguru.com/ |
|
ST500LT012 - LED:000000BC FAddr:00007A43 stuck on bsy http://forum.hddguru.com/viewtopic.php?f=11&t=35303 |
Page 1 of 1 |
Author: | LostDataSa [ April 29th, 2017, 10:41 ] |
Post subject: | ST500LT012 - LED:000000BC FAddr:00007A43 stuck on bsy |
I have ST500LT012 the drive spin for few second then stop and the head is moving (not stuck). then it gets DRD DSC. but when I try to read ID i stuck on BSY DRD DSC until I power OFF/ON the hdd. and when I start utilities this is what I get: LED:000000BC FAddr:00007A43 and after repowering I get in the terminal: Rst 0x10M SPINUP FAILED ExecuteSpinRequest op=0100 resp=0007 op=0100 resp=0007 LED:000000BC FAddr:00007A43 LED:000000BC FAddr:00007A43 CfwDiscCode Not Loaded: 0002B4E0 LED:000000BC FAddr:00007A43 |
Author: | Martin [ April 29th, 2017, 12:51 ] |
Post subject: | Re: ST500LT012 - LED:000000BC FAddr:00007A43 stuck on bsy |
LostDataSa wrote: LED:000000BC FAddr:00007A43 CfwDiscCode Not Loaded: 0002B4E0 Overlay wasn't loaded. Probably, due to some damages in SA. |
Author: | LostDataSa [ April 30th, 2017, 9:46 ] |
Post subject: | Re: ST500LT012 - LED:000000BC FAddr:00007A43 stuck on bsy |
I suspect bad media but I'm curious why the "SPINUP FAILED" message. The drive spins up fine with HDA isolated, so it's not seized spindle. |
Author: | Martin [ April 30th, 2017, 10:26 ] |
Post subject: | Re: ST500LT012 - LED:000000BC FAddr:00007A43 stuck on bsy |
Because this massage relates to servo recalibration, not to SPIN UP literally. And yes, you have to think about heads replacement, current heads are not good with big probability. |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |