Hello guys!
I have WD drive which comes ready after power on but hangs when I'm trying start the Utility.
Can somedody help me?
| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| WD drive isn't responding http://forum.hddguru.com/viewtopic.php?f=11&t=35762 |
Page 1 of 1 |
| Author: | Lylor [ August 31st, 2017, 5:11 ] |
| Post subject: | WD drive isn't responding |
Hello guys! I have WD drive which comes ready after power on but hangs when I'm trying start the Utility. Can somedody help me? |
|
| Author: | MindMergepk [ August 31st, 2017, 11:38 ] |
| Post subject: | Re: WD drive isn't responding |
what tools you are using ? can take a look remotely if interested good luck |
|
| Author: | lifeguarddubai [ September 3rd, 2017, 1:57 ] |
| Post subject: | Re: WD drive isn't responding |
he is using Pc3000 i think as post is in Pc3000 Category ... |
|
| Author: | lifeguarddubai [ September 3rd, 2017, 2:00 ] |
| Post subject: | Re: WD drive isn't responding |
hi, could you give more details about drive & Behavior when you power on . |
|
| Author: | hddguy [ September 4th, 2017, 8:42 ] |
| Post subject: | Re: WD drive isn't responding |
Lylor wrote: Hello guys! I have WD drive which comes ready after power on but hangs when I'm trying start the Utility. Can somedody help me? sounds like common issue relating to device relocation parameters - clear parameters inside module #02 and empty #32 - you may need to force device into a ready state without loading current SA to RAM otherwise you will face BSY error constantly |
|
| Author: | Lylor [ November 22nd, 2017, 13:38 ] |
| Post subject: | Re: WD drive isn't responding |
hddguy wrote: Lylor wrote: Hello guys! I have WD drive which comes ready after power on but hangs when I'm trying start the Utility. Can somedody help me? sounds like common issue relating to device relocation parameters - clear parameters inside module #02 and empty #32 - you may need to force device into a ready state without loading current SA to RAM otherwise you will face BSY error constantly Already forgot about my question here. Yes, it was like you said. There were problemas with clearing parameters but I managed! thank you |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|