All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 8 posts ] 
Author Message
 Post subject: WD10JMVW 2.5 usb - connect sata adapter
PostPosted: September 12th, 2017, 10:16 
Offline

Joined: July 27th, 2017, 4:01
Posts: 13
Location: turkey
How to connect sata adapter to pcb for this drive?
help please


Top
 Profile  
 
 Post subject: Re: WD10JMVW 2.5 usb - connect sata adapter
PostPosted: September 12th, 2017, 11:06 
Offline
User avatar

Joined: October 21st, 2014, 1:39
Posts: 47
Location: Ellijay, GA
You will probably have a better chance of getting help if you post quality pictures of both sides of your PCB. That said, it might just be easier to use a SATA PCB. Typically 771960, 771939, 771959 for that drive (assuming it has a 771961 PCB).

_________________
Blizzard Data Recovery


Top
 Profile  
 
 Post subject: Re: WD10JMVW 2.5 usb - connect sata adapter
PostPosted: September 12th, 2017, 13:14 
Offline

Joined: July 27th, 2017, 4:01
Posts: 13
Location: turkey
I have only one side picture with me now.You are right its board number is 771961


Attachments:
DSC_0402.JPG
DSC_0402.JPG [ 1.91 MiB | Viewed 287 times ]
Top
 Profile  
 
 Post subject: Re: WD10JMVW 2.5 usb - connect sata adapter
PostPosted: September 12th, 2017, 13:17 
Offline
User avatar

Joined: April 3rd, 2011, 0:19
Posts: 1616
Location: Providence, RI
There is no adapter per se. The conversion from SATA to USB is all built into the drive. There are two resistors that you can generally remove and solder into the SATA lanes if you must do it that way. However, it's generally easier to just transfer the ROM or ROM code to a matched SATA board. I've been keeping an updated list of compatible SATA boards on this thread: https://www.data-medics.com/forum/wd-pa ... e-t13.html

However, you'll likely find that by bypassing the USB bridge the data will be encrypted. So you'll need to have a method for handling the encryption afterward.

_________________
Hard Drive & RAID Data Recovery Services
https://www.data-medics.com/raid-data-recovery/


Top
 Profile  
 
 Post subject: Re: WD10JMVW 2.5 usb - connect sata adapter
PostPosted: September 12th, 2017, 13:25 
Offline

Joined: July 27th, 2017, 4:01
Posts: 13
Location: turkey
Also I dont have compatible pcb.
So I need coonect sata adapter


Top
 Profile  
 
 Post subject: Re: WD10JMVW 2.5 usb - connect sata adapter
PostPosted: September 18th, 2017, 3:20 
Offline

Joined: September 1st, 2014, 17:08
Posts: 20
Location: Singapore
ctanis wrote:
Also I dont have compatible pcb.
So I need coonect sata adapter


:lol:


Top
 Profile  
 
 Post subject: Re: WD10JMVW 2.5 usb - connect sata adapter
PostPosted: September 18th, 2017, 3:30 
Offline
User avatar

Joined: July 12th, 2010, 4:38
Posts: 994
Location: Portugal
And why don't you buy one?
It's cheap...

And with PC3K (which I assume you have) it's a job for a few minutes, instead of some time soldering...

_________________
http://www.facebook.com/PCLAB.Assistencia.Tecnica
ACELab partner


Top
 Profile  
 
 Post subject: Re: WD10JMVW 2.5 usb - connect sata adapter
PostPosted: September 18th, 2017, 13:06 
Offline
User avatar

Joined: April 3rd, 2011, 0:19
Posts: 1616
Location: Providence, RI
Here's the connection points: https://www.data-medics.com/forum/board ... t1828.html

_________________
Hard Drive & RAID Data Recovery Services
https://www.data-medics.com/raid-data-recovery/


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 8 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 5 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group