December 14th, 2018, 7:14
data-medics wrote:There is no adapter per se. The conversion from SATA to USB is all built into the drive. There are two resistors that you can generally remove and solder into the SATA lanes if you must do it that way. However, it's generally easier to just transfer the ROM or ROM code to a matched SATA board. I've been keeping an updated list of compatible SATA boards on this thread: https://www.data-medics.com/forum/wd-pa ... e-t13.html
However, you'll likely find that by bypassing the USB bridge the data will be encrypted. So you'll need to have a method for handling the encryption afterward.
December 14th, 2018, 10:09
zamach132 wrote:Witch resistors ?
January 5th, 2019, 11:47
March 3rd, 2019, 18:05
March 3rd, 2019, 18:22
March 3rd, 2019, 18:33
Powered by phpBB © phpBB Group.