| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| ST380013AS http://forum.hddguru.com/viewtopic.php?f=11&t=36099 |
Page 1 of 1 |
| Author: | zekimuren [ November 21st, 2017, 8:33 ] | ||||
| Post subject: | ST380013AS | ||||
Hi I got SEAGATE BARRACUDA ST380013AS it gets ready and Drive ID is full and correct When I do sector edit or enter any command hdd is busy. Terminal window is:
|
|||||
| Author: | zekimuren [ November 21st, 2017, 8:34 ] |
| Post subject: | Re: ST380013AS |
What is do hdd reboot? and What is meaning wrong in terminal? |
|
| Author: | pclab [ November 21st, 2017, 10:09 ] |
| Post subject: | Re: ST380013AS |
Have you tried to do a headmap and select each one and test? Seems to be a bad head... |
|
| Author: | lifeguarddubai [ November 22nd, 2017, 2:36 ] |
| Post subject: | Re: ST380013AS |
Agree with Split Heads seems bad, try swap Donor Heads before that try using Seagate Utility while creating Task with LDR.. |
|
| Author: | zekimuren [ November 23rd, 2017, 7:55 ] |
| Post subject: | Re: ST380013AS |
Firstly, Thanks a lot for response. İn this case, PC 3000 dont allow creating head map. I saw HDD ID and SERIAL Number. But If I want to read sector But HDD can read so little sector then HDD stoped. Dırectly, Before that I swap head from donor disk to patient disk. What should I do? |
|
| Author: | labtech [ November 23rd, 2017, 11:42 ] |
| Post subject: | Re: ST380013AS |
Can test heads manually in terminal. Check manual on how. |
|
| Author: | Phaz [ November 28th, 2017, 14:21 ] |
| Post subject: | Re: ST380013AS |
It can be a pending issue with bad heads. Create a task with active utility actions, and try to solve the pending issue with head map changing at once. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|