All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 3 posts ] 
Author Message
 Post subject: Flash boot code checksum failure! on ST2000DM001
PostPosted: June 17th, 2018, 13:05 
Offline

Joined: June 17th, 2018, 12:40
Posts: 10
Location: Vancouver
I need some help

I have this drive and it was clicking . we find the right donor and replaced the head

now after the head is replaced on pc3000 terminal I am getting the following error

drive show busy and can not read

Here is the drive information

look like rom is corrupt


Model no: ST2000DM001
PART NO PYN164-500
FW CC4B
wwn 5000c500497d2b25
date 12407
site wu



Terminal log shows as follows


SEA4 Boot ROM 2.0 (05/03/2010)
Copyright Seagate 2010

Flash boot code checksum failure!

SEA4 Boot ROM 1.0 (05/03/2010)
Copyright Seagate 2010

Flash boot code checksum failure!

SEA4 Boot ROM 1.0 (05/03/2010)


Top
 Profile  
 
 Post subject: Re: Flash boot code checksum failure! on ST2000DM001
PostPosted: June 17th, 2018, 14:37 
Offline

Joined: November 29th, 2006, 10:08
Posts: 7081
Location: UK
Have you removed or switched the ROM at any point?

_________________
PC Image Data Recovery
www.pcimage.co.uk


Top
 Profile  
 
 Post subject: Re: Flash boot code checksum failure! on ST2000DM001
PostPosted: June 17th, 2018, 16:11 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 10422
Location: Australia
If you upload your ROM dump, I could check it for you.

_________________
A backup a day keeps DR away.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 6 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group