| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| Seagate Pharoah_oasis st500dm009 error LED:0x000000EE FAddr: http://forum.hddguru.com/viewtopic.php?f=11&t=37035 |
Page 1 of 1 |
| Author: | thinclient [ July 2nd, 2018, 8:34 ] |
| Post subject: | Seagate Pharoah_oasis st500dm009 error LED:0x000000EE FAddr: |
Hemendra Newbie Posts: 19 Joined: Tue Jan 20 Reputation: 1 / (13) Contact: Contact Hemendra Seagate Pharoah_oasis st500dm009 error LED:0x000000EE FAddr:0x003211FC #10 Postby Hemendra ยป Mon Jul 02, 2018 5:01 pm I have Seagate ST500dm009 Firmware CC43 Family 9401 Pharoad_oasis. Terminal output Boot 0x20M SpinUp Rst 0x20M Thermistor Temp 001F Retry delay Retry delay DOS:0 Scan Unit LD: PP: LED:0x000000EE FAddr:0x003211FC pcb no: 100774000 REV C I can't access terminal. After terminal port it gives immediately LED error. Noclicking, NO motor stop. Thanks, |
|
| Author: | thinclient [ July 6th, 2018, 4:25 ] | |||
| Post subject: | Re: Seagate Pharoah_oasis st500dm009 error LED:0x000000EE FA | |||
Attached the PCB Photos. I have Tried for the marked two points for Terminal Access T>. but can not sucess. is any option or suggestion?
|
||||
| Author: | pepe [ November 16th, 2018, 7:46 ] |
| Post subject: | Re: Seagate Pharoah_oasis st500dm009 error LED:0x000000EE FA |
It is pretty though to determine the cause of that error message precisely without having the drive. People say shorting some pads on pcb sometimes help, but to be honest i never use such trick, usually avoid the error by other means. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|