HDD GURU FORUMS http://forum.hddguru.com/ |
|
WD30EFRX ROM needed http://forum.hddguru.com/viewtopic.php?f=11&t=37064 |
Page 1 of 1 |
Author: | Miss Di [ July 11th, 2018, 6:51 ] |
Post subject: | WD30EFRX ROM needed |
Hello, I have a WD30EZRX-00SPEB0 with the ROM damaged. Unfortunatly I do not have any compatible ROM. Does someone have a compatible disk that can send me the ROM to try if it is compatible. WD30EXRX-00SPEB0 27 MAY 2015 HANNHTJCAB S/N WCC4... PCB: 771945-002 Rev.A Thanks. |
Author: | jermy [ July 11th, 2018, 7:25 ] |
Post subject: | Re: WD30EFRX ROM needed |
are you sure about the model ? what family is it ? is the ROM completely damaged ? what do you get when read it an external programmer ? |
Author: | Miss Di [ July 11th, 2018, 9:49 ] |
Post subject: | Re: WD30EFRX ROM needed |
Yes it is that model. I think family is Diablo 3S. I cannot read the ROM with the external programmer. |
Author: | jermy [ July 11th, 2018, 10:08 ] |
Post subject: | Re: WD30EFRX ROM needed |
Miss Di wrote: Yes it is that model. cant be both the title says WD30EFRX and Miss Di wrote: I have a WD30EZRX-00SPEB0... and latter it says Miss Di wrote: WD30EXRX-00SPEB0
27 MAY 2015 HANNHTJCAB S/N WCC4... PCB: 771945-002 Rev.A |
Author: | Mikippp [ July 11th, 2018, 10:15 ] | |||
Post subject: | Re: WD30EFRX ROM needed | |||
Hi, Family is Giant Mikippp
|
Author: | jermy [ July 11th, 2018, 10:19 ] | ||
Post subject: | Re: WD30EFRX ROM needed | ||
try this one (adapt the ROM if needed its from A WD40)
|
Author: | Miss Di [ July 11th, 2018, 12:36 ] |
Post subject: | Re: WD30EFRX ROM needed |
Thanks for all your answers and sorry for the confusion about the model. The correct one: WD30EZRX-00SPEB0 27 MAY 2015 HANNHTJCAB S/N WCC4... PCB: 771945-002 Rev.A |
Author: | jermy [ July 11th, 2018, 14:42 ] |
Post subject: | Re: WD30EFRX ROM needed |
nothing has been changed my reply stays the same try the ROM I've attached jermy wrote: try this one (adapt the ROM if needed its from A WD40)
|
Author: | reco [ July 19th, 2018, 21:44 ] |
Post subject: | Re: WD30EFRX ROM needed |
Miss Di wrote: Thanks for all your answers and sorry for the confusion about the model. The correct one: WD30EZRX-00SPEB0 27 MAY 2015 HANNHTJCAB S/N WCC4... PCB: 771945-002 Rev.A FYI: http://myfwcloud.com/resource/10119 http://firmware.hddsurgery.com/?manufac ... Sadle%20G6 |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |