| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| Damaged ROM WD10TMVW-11ZSMS0 http://forum.hddguru.com/viewtopic.php?f=11&t=37337 |
Page 1 of 1 |
| Author: | oliver1996 [ September 4th, 2018, 7:32 ] |
| Post subject: | Damaged ROM WD10TMVW-11ZSMS0 |
Hello, Can anyone please help me how to find compatible ROM to this drive? PCB of patient is bad and I want to avoid soldering. I tried about 10 different ROMs of size 512 Kb, but nothing works. The ROM has maybe size of 256 Kb. HDD ID: WD10TMVW-11ZSMS0 DATE 21 OCT 2010 DCM EBMTJBBB SN WXP1E80Z9966 If you have any advice how to solve this case, please let me know. Thanks. |
|
| Author: | digisupport [ September 4th, 2018, 14:56 ] |
| Post subject: | Re: Damaged ROM WD10TMVW-11ZSMS0 |
Have seen a lot of bad Helios drives, but not many pcb´s - whats wrong ? |
|
| Author: | pclab [ September 13th, 2018, 17:29 ] |
| Post subject: | Re: Damaged ROM WD10TMVW-11ZSMS0 |
If you have PC3000, have you tried to read ROM by COM-port? Or the PCB is 100% dead? |
|
| Author: | MindMergepk [ September 15th, 2018, 9:14 ] |
| Post subject: | Re: Damaged ROM WD10TMVW-11ZSMS0 |
Helios drive use 2 different PCBs i think, whats the number on PCB ? |
|
| Author: | COD [ September 29th, 2018, 9:11 ] |
| Post subject: | Re: Damaged ROM WD10TMVW-11ZSMS0 |
oliver1996 wrote: Hello, I want to avoid soldering. Thanks. Why? resoldering ROM to e good electronic board is the chipest and best solution. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|