I was trying to read Sandisk SD card, the bytes at the odd position are skipped, I attached a picture that explains the issue.
NAND ID= 45CE9532
How can it be fixed?
| Attachments: |
|
sandisk.png [ 101.83 KiB | Viewed 5887 times ] |
| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| Sandisk SD bad NAND read http://forum.hddguru.com/viewtopic.php?f=11&t=37513 |
Page 1 of 1 |
| Author: | kikiki [ October 9th, 2018, 11:08 ] | ||
| Post subject: | Sandisk SD bad NAND read | ||
I was trying to read Sandisk SD card, the bytes at the odd position are skipped, I attached a picture that explains the issue. NAND ID= 45CE9532 How can it be fixed?
|
|||
| Author: | HaQue [ October 9th, 2018, 20:01 ] |
| Post subject: | Re: Sandisk SD bad NAND read |
maybe the config for the chip was wrong, or you used 8-bit config when chip is 16-bit.... or the device is refurbished/fake and has a strange byte cut, or a mix step that will fix that.. what is the hex editor you are using there? what reader did you use and what config? |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|