| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| TOSHIBA DT01ACA050 No user area access http://forum.hddguru.com/viewtopic.php?f=11&t=37557 |
Page 1 of 1 |
| Author: | LostDataSa [ October 17th, 2018, 15:47 ] | ||
| Post subject: | TOSHIBA DT01ACA050 No user area access | ||
Hi I got TOSHIBA DT01ACA050 with a bad head (this HDD have only one physical head P0). After head replacement, I imaged about 10 GB then it starts giving me an error (black sectors). The drive gets ready and I have access to SA using Hitachi-IBM-ARM 7210DLE6 and everything looks fine but no access to user area ?? Any suggestion? Attached SA structure test
|
|||
| Author: | MindMergepk [ October 18th, 2018, 4:03 ] |
| Post subject: | Re: TOSHIBA DT01ACA050 No user area access |
what if you load translators in RAM, does it give access this way ? |
|
| Author: | LostDataSa [ October 19th, 2018, 9:25 ] |
| Post subject: | Re: TOSHIBA DT01ACA050 No user area access |
MindMergepk wrote: what if you load translators in RAM, does it give access this way ? I did, still no user access 
|
|
| Author: | hamidbid [ October 19th, 2018, 13:05 ] |
| Post subject: | Re: TOSHIBA DT01ACA050 No user area access |
Maybe head again gone?pls check again, Do you access to the first 10 gig of HDD? |
|
| Author: | LostDataSa [ October 19th, 2018, 23:49 ] |
| Post subject: | Re: TOSHIBA DT01ACA050 No user area access |
hamidbid wrote: Maybe head again gone?pls check again, Do you access to the first 10 GB of HDD? I tried to access the first 10GB again but no access I get UNC error, but I have access to SA while this drive has only one head ?? |
|
| Author: | hamidbid [ October 20th, 2018, 7:22 ] |
| Post subject: | Re: TOSHIBA DT01ACA050 No user area access |
LostDataSa wrote: hamidbid wrote: Maybe head again gone?pls check again, Do you access to the first 10 GB of HDD? I tried to access the first 10GB again but no access I get UNC error, but I have access to SA while this drive has only one head ?? Then your head gone again! |
|
| Author: | LostDataSa [ October 20th, 2018, 10:33 ] |
| Post subject: | Re: TOSHIBA DT01ACA050 No user area access |
hamidbid wrote: Then your head gone again! If the only head is bad, will i have access to SA? |
|
| Author: | MindMergepk [ October 20th, 2018, 15:37 ] |
| Post subject: | Re: TOSHIBA DT01ACA050 No user area access |
LostDataSa wrote: If the only head is bad, will i have access to SA? yes it is possible... |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|
