I did. I found that it's heads problem. It doesn't read in donor too. My mistake was that i took sector address from DE and put it in utility. I forgot that it's not the same when you use physical sector size, not logical.
| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| Toshiba DT01ACA100 - can't read in DE. Does read in utility http://forum.hddguru.com/viewtopic.php?f=11&t=38187 |
Page 1 of 1 |
| Author: | melvin [ March 12th, 2019, 12:51 ] |
| Post subject: | Toshiba DT01ACA100 - can't read in DE. Does read in utility |
Hello, Just got stuck with this Hitachi drive. It had one bad head. I got 100% of the other. Changed heads, and it was reading well for a while. It stoped at some point and now i can't read anything more in DE. But i can read the same sector in utility. Quick test shows that this head can read. The only problem i found is SMART. One copy is bad. And i can't check SMART at all. But it was the same earlier. All crucial modules are ok escept AMPM, HLR1,HLR2 which are yellow. Any hints? |
|
| Author: | ddrecovery [ March 12th, 2019, 13:29 ] |
| Post subject: | Re: Toshiba DT01ACA100 - can't read in DE. Does read in util |
I am not sure if it supports this particular model, but did you try to read with the Active Utility? |
|
| Author: | melvin [ March 12th, 2019, 13:51 ] |
| Post subject: | Re: Toshiba DT01ACA100 - can't read in DE. Does read in util |
I did. I found that it's heads problem. It doesn't read in donor too. My mistake was that i took sector address from DE and put it in utility. I forgot that it's not the same when you use physical sector size, not logical.
|
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|